libevdev 1.13.1
Introduction to libevdev
The libevdev package contains common functions for Xorg input drivers.
![[Note]](../images/note.png)
Note
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Package Information
libevdev Dependencies
Optional
Doxygen-1.10.0 and Valgrind-3.22.0 (optional for tests)
Kernel Configuration
Enable the following options in the kernel configuration and recompile the kernel if necessary:
Device Drivers --->
Input device support --->
-*- Generic input layer (needed for keyboard, mouse, ...) [INPUT]
<*/M> Event interface [INPUT_EVDEV]
If you want to test this package with full coverage, the following options are needed as well:
Device Drivers --->
Input device support --->
-*- Generic input layer (needed for keyboard, mouse, ...) [INPUT]
[*] Miscellaneous devices ---> [INPUT_MISC]
<*/M> User level driver support [INPUT_UINPUT]
If you build this as a module, it needs to be inserted before the test suite runs.
Installation of libevdev
Install libevdev by running the following commands:
mkdir build &&
cd build &&
meson setup .. \
--prefix=$XORG_PREFIX \
--buildtype=release \
-Ddocumentation=disabled &&
ninja
The regression tests can be run as the root user with ninja test, in a graphical session. You need to have enabled the CONFIG_INPUT_UINPUT setting in the kernel for full test coverage. If it is enabled as a module, the module is named uinput and needs to be loaded before running the tests. Note that on some systems, the tests may cause a hard lockup and require a reboot. On laptops, the system will go into Sleep and need to be woken up to finish the test suites.
Now, as the root user:
ninja install
Contents
Installed Xorg Programs: libevdev-tweak-device, mouse-dpi-tool, and touchpad-edge-detector
Installed Xorg Library: libevdev.so
Installed Xorg Directory: $XORG_PREFIX/include/libevdev-1.0
Short Descriptions
|
libevdev-tweak-device
|
is a tool to change some kernel device properties
|
|
mouse-dpi-tool
|
is a tool to estimate the resolution of a mouse
|
|
touchpad-edge-detector
|
touchpad-edge-detector is a tool that reads the touchpad events from the kernel and calculates the minimum and maximum for the x and y coordinates, respectively
|
|
libevdev.so
|
is a library of Xorg driver input functions
|
Xorg Evdev Driver-2.10.6
Introduction to Xorg Evdev Driver
The Xorg Evdev Driver package contains a Generic Linux input driver for the Xorg X server. It handles keyboard, mouse, touchpads and wacom devices, though for touchpad and wacom advanced handling, additional drivers are required.
Note
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Package Information
Xorg Evdev Driver Dependencies
Required
libevdev-1.13.1, mtdev-1.1.6, and Xorg-Server-21.1.11
Installation of Xorg Evdev Driver
Install Xorg Evdev Driver by running the following commands:
./configure $XORG_CONFIG &&
make
This package does not come with a test suite.
Now, as the root user:
make install
Contents
Installed Xorg Driver: evdev_drv.so
Short Descriptions
|
evdev_drv.so
|
is an Xorg input driver for Linux generic event devices
|
libinput-1.25.0
Introduction to Libinput
libinput is a library that handles input devices for display servers and other applications that need to directly deal with input devices.
Note
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Package Information
libinput Dependencies
Required
libevdev-1.13.1 and mtdev-1.1.6
Optional
Valgrind-3.22.0 (to run the tests), GTK+-3.24.40 (to build the GUI event viewer), libunwind-1.6.2 (required for tests), libwacom-2.9.0, sphinx-7.2.6 (required to build documentation), and pyparsing-3.1.1 (for one non-root test)
Kernel Configuration for Running the Libinput Test Suite
Although libinput works with the same kernel configuration used by libevdev-1.13.1, its extensive test suite requires the presence of /dev/uinput (as well as both Valgrind-3.22.0 and libunwind-1.6.2).
If you wish to run the full tests, enable the following option in the kernel configuration and recompile the kernel if necessary:
Device Drivers --->
Input device support --->
-*- Generic input layer (needed for keyboard, mouse, ...) [INPUT]
[*] Miscellaneous devices ---> [INPUT_MISC]
<*/M> User level driver support [INPUT_UINPUT]
If you build this as a module, it needs to be inserted before the test suite runs.
On an Xorg system you will also need to prevent the events generated during the test suite from interfering with your desktop. Copy the file test/50-litest.conf into ${XORG_PREFIX}/share/X11/xorg.conf.d and restart X. For further information see libinput test suite.
Installation of Libinput
Install libinput by running the following commands:
mkdir build &&
cd build &&
meson setup --prefix=$XORG_PREFIX \
--buildtype=release \
-Ddebug-gui=false \
-Dtests=false \
-Dlibwacom=false \
-Dudev-dir=/usr/lib/udev \
.. &&
ninja
Note
If you want to run the full tests, remove -Dtests from the meson command above. Please read "kernel configuration for running the libinput test suite" (above).
If you have enabled the full tests, you can run the main tests as the root user by executing: ninja test. A very large number of tests will be run. One test fails on wayland.
Now, as the root user:
ninja install
If you have passed -Ddocumentation=true to meson, you can install the generated documentation by running the following commands as the root user:
install -v -dm755 /usr/share/doc/libinput-1.25.0/html &&
cp -rv Documentation/* /usr/share/doc/libinput-1.25.0/html
Command Explanations
--buildtype=release: Specify a buildtype suitable for stable releases of the package, as the default may produce unoptimized binaries.
-Ddebug-gui=false: This switch disables creation of a visual debug helper for libinput. Remove if you want it, and you have GTK+-3.24.40 installed.
-Dtests=false: This switch disables compilation of the main tests. Even with the tests defined as false, you can still run the first four minor tests, as a regular user, but one will be skipped if pyparsing-3.1.1 is not installed.
-Dlibwacom=false: Remove this option if you have libwacom-2.9.0 installed, or if you are installing GNOME.
-Dudev-dir=/usr/lib/udev: In case that the value of XORG_PREFIX is not set to /usr, this option prevents the package from installing Udev rules and helpers into $XORG_PREFIX/lib/udev which is not searched by Udev daemon. This option is not needed for systems with XORG_PREFIX set to /usr, but does no harm.
-Ddocumentation=true: This switch enables generation of the documentation. Add it if you want to generate the documentation. You must have Doxygen-1.10.0 and Graphviz-9.0.0 installed.
Contents
Installed Programs: libinput
Installed Libraries: libinput.so
Installed Directories: /etc/libinput, $XORG_PREFIX/libexec/libinput, $XORG_PREFIX/share/libinput, and (optionally) $XORG_PREFIX/share/doc/libinput-1.25.0
Short Descriptions
|
libinput
|
is a set of tools to interface with the libinput library
|
|
libinput.so
|
contains API functions for handling input devices
|
Xorg Libinput Driver-1.4.0
Introduction to Xorg Libinput Driver
The X.Org Libinput Driver is a thin wrapper around libinput and allows for libinput to be used for input devices in X. This driver can be used as drop-in replacement for evdev and synaptics.
Note
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Package Information
Xorg Libinput Driver Dependencies
Required
libinput-1.25.0 and Xorg-Server-21.1.11
Installation of Xorg Libinput Driver
Install Xorg Libinput Driver by running the following commands:
./configure $XORG_CONFIG &&
make
To test the results, issue make check.
Now, as the root user:
make install
Contents
Installed Xorg Driver: libinput_drv.so
Short Descriptions
|
libinput_drv.so
|
is an Xorg input driver for mouse, keyboard, touchpad, touchscreen, and tablet devices
|
Xorg Synaptics Driver-1.9.2
Introduction to Xorg Synaptics Driver
The Xorg Synaptics Driver package contains the X.Org Input Driver, support programs and SDK for Synaptics touchpads. Even though the evdev driver can handle touchpads very well, this driver is required if you want to use advanced features like multi tapping, scrolling with touchpad, turning the touchpad off while typing, etc.
Note
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Package Information
Xorg Synaptics Driver Dependencies
Required
libevdev-1.13.1 and Xorg-Server-21.1.11
Installation of Xorg Synaptics Driver
Install Xorg Synaptics Driver by running the following commands:
./configure $XORG_CONFIG &&
make
This package does not come with a test suite.
Now, as the root user:
make install
Contents
Installed Programs: synclient and syndaemon
Installed Xorg Driver: synaptics_drv.so
Short Descriptions
|
synclient
|
is a command line utility used to query and modify Synaptics driver options
|
|
syndaemon
|
is a program that monitors keyboard activity and disables the touchpad when the keyboard is being used
|
|
synaptics_drv.so
|
is an Xorg input driver for touchpads
|
Xorg Wacom Driver-1.2.0
Introduction to Xorg Wacom Driver
The Xorg Wacom Driver package contains the X.Org X11 driver and SDK for Wacom and Wacom-like tablets. It is not required to use a Wacom tablet, the xf86-input-evdev driver can handle these devices without problems.
Note
Development versions of BLFS may not build or run some packages properly if LFS or dependencies have been updated since the most recent stable versions of the books.
Package Information
Xorg Wacom Drivers Dependencies
Required
Xorg-Server-21.1.11
Optional
Doxygen-1.10.0 and Graphviz-9.0.0
Kernel Configuration
To use a Wacom tablet with USB interface, enable the following options in your kernel configuration and recompile. Note that other configuration options could be required for tablet with a serial or bluetooth interface:
Device Drivers --->
[*] HID bus support ---> [HID_SUPPORT]
{*/M} HID bus core support [HID]
Special HID drivers --->
<*/M> Wacom Intuos/Graphire tablet support (USB) [HID_WACOM]
USB HID support --->
<*/M> USB HID transport layer [USB_HID]
[*] USB support ---> [USB_SUPPORT]
<*/M> Support for Host-side USB [USB]
Installation of Xorg Wacom Driver
Install Xorg Wacom Driver by running the following commands:
./configure $XORG_CONFIG --with-systemd-unit-dir=no &&
make
To test the results, issue: make check.
Now, as the root user:
make install
Contents
Installed Programs: isdv4-serial-debugger, isdv4-serial-inputattach, and xsetwacom
Installed Xorg Driver: wacom_drv.so
Short Descriptions
|
xsetwacom
|
is a commandline utility used to query and modify wacom driver settings
|
|
wacom_drv.so
|
is an Xorg input driver for Wacom devices
|