The sddm package contains a lightweight display manager based upon Qt and QML.
This package is known to build and work properly using an LFS 12.2 platform.
Download (HTTP): https://github.com/sddm/sddm/archive/v0.21.0/sddm-0.21.0.tar.gz
Download MD5 sum: e32a35c282d9be3360737eefbe25b5fa
Download size: 3.4 MB
Estimated disk space required: 24 MB
Estimated build time: 0.3 SBU (Using parallelism=4)
CMake-3.30.2, extra-cmake-modules-6.5.0, and Qt-6.7.2
docutils-0.21.2 (for the man pages), Linux-PAM-1.6.1, and UPower-1.90.4
First, create a dedicated user and group to take control of the
sddm daemon after it
is started. Issue the following commands as the root
user:
groupadd -g 64 sddm && useradd -c "sddm Daemon" \ -d /var/lib/sddm \ -u 64 -g sddm \ -s /bin/false sddm
Install sddm by running the following commands:
mkdir build && cd build && cmake -D CMAKE_INSTALL_PREFIX=/usr \ -D CMAKE_BUILD_TYPE=Release \ -D ENABLE_JOURNALD=OFF \ -D NO_SYSTEMD=ON \ -D RUNTIME_DIR=/run/sddm \ -D USE_ELOGIND=ON \ -D BUILD_MAN_PAGES=ON \ -D BUILD_WITH_QT6=ON \ -D DATA_INSTALL_DIR=/usr/share/sddm \ -D DBUS_CONFIG_FILENAME=sddm_org.freedesktop.DisplayManager.conf \ .. && make
This package does not come with a test suite.
Now, as the root
user:
make install && install -v -dm755 -o sddm -g sddm /var/lib/sddm /usr/bin/sddm --example-config > /etc/sddm.conf
-D
CMAKE_BUILD_TYPE=Release
: This switch is used to apply
additional compiler optimizations.
-D ENABLE_JOURNALD=OFF
and
-D NO_SYSTEMD=ON
: These
switches are used because this version of BLFS does not support
systemd.
-D
DBUS_CONFIG_FILENAME=sddm_org.freedesktop.DisplayManager.conf
:
This switch prevents the file /etc/dbus-1/system.d/org.freedesktop.DisplayManager.conf
from being overwritten, as it may be used by other DM's.
-D BUILD_MAN_PAGES=ON
: This
switch is used to build and install man pages.
/etc/sddm.config
Normally, you want to edit this file. For example, if Xorg is
installed in /opt, use your preferred editor as the root
user to replace the default XauthPath value by /opt/xorg/bin/xauth. Or, as the
root
user, issue:
sed -i.orig '/ServerPath/ s|usr|opt/xorg|' /etc/sddm.conf
This command will do the substitution and create a copy of the
original file with name /etc/sddm.conf.orig
.
From now on, we will describe how to modify configurations using
sed. Of course, you may instead use your preferred editor as the
root
user.
For security reasons, you normally want the default ServerArguments=-nolisten tcp, unless
a remote machine needs access to the local X server. In that
case, as the root
user, issue:
sed -i 's/-nolisten tcp//' /etc/sddm.conf
Desktop (Notebook) users, normally want the Num Lock key on
(off). For that, as root
, issue:
sed -i '/Numlock/s/none/on/' /etc/sddm.conf
for Desktop users. For Notebook users, replace /on/ by /off/ in the command above.
By default, a virtual keyboard is presented for the user. If this
is not desired, run as root
:
sed -i 's/qtvirtualkeyboard//' /etc/sddm.conf
Install the /etc/rc.d/init.d/xdm
init script from the blfs-bootscripts-20240416 package, as the
root
user:
make install-sddm
The install procedure above installed a set of PAM configuration files. These procedures overwrite them and use versions compatible with a BLFS environment.
If you have built sddm with
Linux PAM support, create the
necessary configuration files by running the following commands
as the root
user:
cat > /etc/pam.d/sddm << "EOF"# Begin /etc/pam.d/sddm auth requisite pam_nologin.so auth required pam_env.so auth required pam_succeed_if.so uid >= 1000 quiet auth include system-auth account include system-account password include system-password session required pam_limits.so session include system-session # End /etc/pam.d/sddm
EOF cat > /etc/pam.d/sddm-autologin << "EOF"# Begin /etc/pam.d/sddm-autologin auth requisite pam_nologin.so auth required pam_env.so auth required pam_succeed_if.so uid >= 1000 quiet auth required pam_permit.so account include system-account password required pam_deny.so session required pam_limits.so session include system-session # End /etc/pam.d/sddm-autologin
EOF cat > /etc/pam.d/sddm-greeter << "EOF"# Begin /etc/pam.d/sddm-greeter auth required pam_env.so auth required pam_permit.so account required pam_permit.so password required pam_deny.so session required pam_unix.so -session optional pam_systemd.so # End /etc/pam.d/sddm-greeter
EOF
If the sddm bootscript has been installed, start sddm by running,
as the root
user:
/etc/rc.d/init.d/xdm start
By convention, X should be executed at runlevel 5, consequently,
the same is true for sddm.
However, the default runlevel is 3. Changing to runlevel 5, from
a console terminal, as root
user,
starts the sddm
bootscript, bringing up the greeter screen:
init 5
In order to permanently set the default to 5, starting the
sddm greeter screen
automatically, modify /etc/inittab
as the root
user:
cp -v /etc/inittab{,-orig} && sed -i '/initdefault/ s/3/5/' /etc/inittab
The greeter offers a list of available sessions, depending on the
Window Managers and Desktop Environments installed. The list
includes sessions which have a corresponding .desktop
file installed under /usr/share/xsessions
or /usr/share/wayland-sessions
. Most of the Window
Managers and Desktop Environments automatically provide those
files, but if necessary, you may include a custom one.
Three themes are installed at /usr/share/sddm/themes
: elarun, maldives, and
maya. There is also a default theme, which is not present in that
directory. You can install other themes in that directory. In
order to change the theme, you need to edit /etc/sddm.conf
, to change the default (empty)
theme, replacing Current=
with
Current=
, e.g.
<new theme>
Current=maldives
.
In order to see the theme without leaving the session, issue:
sddm-greeter --test-mode --theme <theme path>