The cpio package contains tools for archiving.
This package is known to build and work properly using an LFS-7.9 platform.
Download (HTTP): http://ftp.gnu.org/pub/gnu/cpio/cpio-2.12.tar.bz2
Download (FTP): ftp://ftp.gnu.org/pub/gnu/cpio/cpio-2.12.tar.bz2
Download MD5 sum: 93eea9f07c0058c097891c73e4955456
Download size: 1.2 MB
Estimated disk space required: 18 MB (with tests and docs)
Estimated build time: 0.3 SBU (with tests and docs)
texlive-20150521 (or install-tl-unx)
User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/cpio
Install cpio by running the following commands:
./configure --prefix=/usr \
--bindir=/bin \
--enable-mt \
--with-rmt=/usr/libexec/rmt &&
make &&
makeinfo --html -o doc/html doc/cpio.texi &&
makeinfo --html --no-split -o doc/cpio.html doc/cpio.texi &&
makeinfo --plaintext -o doc/cpio.txt doc/cpio.texi
If you have texlive-20150521 installed and wish to create PDF or Postscript documentation, issue one or both of the following commands:
make -C doc pdf && make -C doc ps
To test the results, issue: make check.
Now, as the root user:
make install &&
install -v -m755 -d /usr/share/doc/cpio-2.12/html &&
install -v -m644 doc/html/* \
/usr/share/doc/cpio-2.12/html &&
install -v -m644 doc/cpio.{html,txt} \
/usr/share/doc/cpio-2.12
If you built PDF or Postscript documentation, install it by issuing
the following commands as the root
user:
install -v -m644 doc/cpio.{pdf,ps,dvi} \
/usr/share/doc/cpio-2.12
sed -i -e '/gets is a/d' gnu/stdio.in.h
&&: This fixes an incompatibility with
glibc-2.16.0.
--bindir=/bin: This
parameter installs cpio to /bin instead of /usr/bin as recommended by the FHS guidelines.
--enable-mt: This parameter
forces the building and installation of the mt program.
--with-rmt=/usr/libexec/rmt: This
parameter inhibits building the rmt program as it is already
installed by the Tar package in
LFS.
Last updated on 2016-02-23 16:02:26 -0800