Contents
/usr/lib/seamonkey-2.20
SeaMonkey is a browser suite, the Open Source sibling of Netscape. It includes the browser, composer, mail and news clients, and an IRC client. It is the follow-on to the Mozilla browser suite.
The Mozilla project also hosts two subprojects that aim to satisfy the needs of users who don't need the complete browser suite or prefer to have separate applications for browsing and e-mail. These subprojects are Firefox-23.0.1 and Thunderbird-17.0.8. Both are based on the Mozilla source code.
This package is known to build and work properly using an LFS-7.4 platform.
Download (HTTP): http://ftp.mozilla.org/pub/mozilla.org/seamonkey/releases/2.20/source/seamonkey-2.20.source.tar.bz2
Download (FTP): ftp://ftp.mozilla.org/pub/mozilla.org/seamonkey/releases/2.20/source/seamonkey-2.20.source.tar.bz2
Download MD5 sum: 04b961790658233b7dafb5222b251bf5
Download size: 134 MB
Estimated disk space required: 1.6 GB (51 MB installed)
Estimated build time: 64 SBU
alsa-lib-1.0.27.2, GTK+-2.24.20, Zip-3.0, and UnZip-6.0.
yasm-1.2.0 or libvpx-1.2.0 (to allow SeaMonkey to play webm videos).
dbus-glib-0.100.2, startup-notification-0.12, SQLite-3.8.0.2, Hunspell, libevent-2.0.21, Doxygen-1.8.5, libnotify-0.7.6, NSPR-4.10, NSS-3.15.1, Wireless Tools-29, Valgrind (only for testing the jemalloc code), and Wget-1.14
User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/seamonkey
The configuration of SeaMonkey is
accomplished by creating a mozconfig
file containing the desired configuration options. A default
mozconfig
file is created below. To
see the entire list of available configuration options (and an
abbreviated description of each one), issue ./configure --help. You may also
wish to review the entire file and uncomment any other desired
options. Create the file by issuing the following command:
cat > mozconfig << EOF # If you have a multicore machine you can speed up the build by running # several jobs at once, but if you have a single core, delete this line: mk_add_options MOZ_MAKE_FLAGS="-j$(getconf _NPROCESSORS_ONLN)" # If you have installed Yasm delete this option: ac_add_options --disable-webm # If you have installed DBus-Glib delete this option: ac_add_options --disable-dbus # If you have installed wireless-tools delete this option: ac_add_options --disable-necko-wifi # If you have installed libnotify delete this option: ac_add_options --disable-libnotify # Uncomment this line if you compiled Cairo with --enable-tee switch and want # to use it instead of the bundled one: #ac_add_options --enable-system-cairo # Uncomment these if you have installed them: # ac_add_options --enable-startup-notification # ac_add_options --enable-system-hunspell # ac_add_options --enable-system-sqlite # ac_add_options --with-system-libevent # ac_add_options --with-system-libvpx # ac_add_options --with-system-nspr # ac_add_options --with-system-nss mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/moz-build-dir ac_add_options --disable-crashreporter ac_add_options --disable-debug ac_add_options --disable-debug-symbols ac_add_options --disable-installer ac_add_options --disable-static ac_add_options --disable-tests ac_add_options --disable-updater ac_add_options --enable-application=suite ac_add_options --enable-shared ac_add_options --enable-system-ffi ac_add_options --prefix=/usr ac_add_options --with-pthreads ac_add_options --with-system-jpeg ac_add_options --with-system-png ac_add_options --with-system-zlib EOF
If you are building against a system-installed Cairo apply the patch:
patch -Np1 -i ../seamonkey-2.20-system_cairo-1.patch
Compile SeaMonkey by running the following command:
If you did not install Xorg in /usr, be sure to specify the location with:
export CPLUS_INCLUDE_PATH=$XORG_PREFIX/include export C_INCLUDE_PATH=$XORG_PREFIX/include
make -f client.mk && make -C moz-build-dir/suite/installer
This package does not come with a test suite. However, if
X is running it can be launched
from the build directory before installing with the command line:
moz-build-dir/mozilla/dist/seamonkey/seamonkey
Install SeaMonkey by issuing the
following commands as the root
user:
rm -rf /usr/lib/seamonkey-2.20 && mkdir -pv /usr/lib/seamonkey-2.20 && tar -xf moz-build-dir/mozilla/dist/seamonkey-2.20.en-US.linux-$(uname -m).tar.bz2 \ -C /usr/lib/seamonkey-2.20 --strip-components=1 && ln -sfv ../lib/seamonkey-2.20/seamonkey /usr/bin && mkdir -pv /usr/lib/mozilla/plugins && ln -sfv ../mozilla/plugins /usr/lib/seamonkey-2.20 && cp -v moz-build-dir/mozilla/dist/man/man1/seamonkey.1 /usr/share/man/man1
The above instructions just install the parts you need to run
SeaMonkey. If you want to compile
gnash-0.8.10, the open source version of Flash,
copy some headers that Gnash needs into /usr/include, as the
root
user:
rm -rf /usr/include/npapi && mkdir -v /usr/include/npapi && cp -v mozilla/dom/plugins/base/*.h /usr/include/npapi
If you want to install the full SeaMonkey development environment, as the
root
user:
make -C moz-build-dir install
make -f client.mk:
Mozilla products are packaged to allow the use of a configuration
file which can be used to pass the configuration settings to the
configure command.
make uses the
client.mk
file to get initial
configuration and setup parameters.
make -C moz-build-dir/suite/installer: this creates a tarball of the finished SeaMonkey.
tar xf moz-build-dir/mozilla/dist/seamonkey-2.20.en-US.linux-$(uname -m).tar.bz2 -C /usr/lib/seamonkey-2.20 --strip-components=1: this untars SeaMonkey into /usr/lib/seamonkey-2.20.
ln -s ../mozilla/plugins
/usr/lib/seamonkey-2.20: this creates a symlink to
/usr/lib/mozilla/plugins
for the sake
of compatibility, to keep all your plugins in the place mozilla
plugins are normally found.
If you deleted the --disable-webm
option from your mozconfig
, your
SeaMonkey can play most youtube
videos without the need for the flash plugin. To enable this, go to
http://www.youtube.com/html5 and
click on 'Join the HTML5 Trial' (needs cookies enabled).
For installing various SeaMonkey plugins, refer to Mozdev's PluginDoc Project.
Along with using the “Preferences” menu to configure SeaMonkey's options and preferences to suit
individual tastes, finer grain control of many options is only
available using a tool not available from the general menu system.
To access this tool, you'll need to open a browser window and enter
about:config
in the address bar.
This will display a list of the configuration preferences and
information related to each one. You can use the
“Filter:” bar to enter
search criteria and narrow down the listed items. Changing a
preference can be done using two methods. One, if the preference
has a boolean value (True/False), simply double-click on the
preference to toggle the value and two, for other preferences
simply right-click on the desired line, choose “Modify” from the menu and change the value.
Creating new preference items is accomplished in the same way,
except choose “New” from the
menu and provide the desired data into the fields when prompted.
There is a multitude of configuration parameters you can tweak to customize SeaMonkey. A very extensive list of these parameters can be found at http://preferential.mozdev.org/preferences.html.
If you use a desktop environment like Gnome or KDE
you may wish to create a seamonkey.desktop
file so that SeaMonkey appears in the panel's menus. If you
didn't enable Startup-Notification
in your mozconfig change the StartupNotify line to false. As the
root
user:
mkdir -pv /usr/share/{applications,pixmaps} && cat > /usr/share/applications/seamonkey.desktop << "EOF" && [Desktop Entry] Encoding=UTF-8 Type=Application Name=SeaMonkey Comment=The Mozilla Suite Icon=seamonkey Exec=seamonkey Categories=Network;GTK;Application;Email;Browser;WebBrowser;News; StartupNotify=true Terminal=false EOF ln -sfv /usr/lib/seamonkey-2.20/chrome/icons/default/seamonkey.png \ /usr/share/pixmaps
/usr/lib/seamonkey-2.20
Last updated on 2013-09-10 09:49:53 -0700