hdparm-5.5
Introduction to hdparm
The hdparm package contains a utility that is useful for controlling ATA/IDE controllers and hard drives both to increase performance and sometimes to increase stability.
![[Warning]](../images/warning.png)
Warning
As well as being useful, incorrect usage of hdparm can destroy your information and in rare cases, drives. Use with caution and make sure you know what you are doing. If in doubt, we recommend you leave the default kernel parameters alone.
-
Download (HTTP): http://www.ibiblio.org/pub/Linux/system/hardware/hdparm-5.5.tar.gz
-
Download size: 33 KB
-
Estimated Disk space required: 257 KB
-
Estimated build time: 0.01 SBU
Installation of hdparm
First apply the required patch:
patch -Np1 -i ../hdparm-5.5-glibc_CVS-1.patch
Install hdparm by running the following commands:
make &&
make install
Note that by default, hdparm is installed in /sbin as some systems may require it during the boot process before /usr is mounted. If you wish to install hdparm under the /usr hierarchy, then replace the above commands with the following:
make &&
make binprefix=/usr install
Contents
The hdparm package contains hdparm.