FAAD2 is a decoder for a lossy sound compression scheme specified in MPEG-2 Part 7 and MPEG-4 Part 3 standards and known as Advanced Audio Coding (AAC).
This package is known to build and work properly using an LFS 11.3 platform.
Download (HTTP): https://github.com/knik0/faad2/archive/2.10.1/faad2-2.10.1.tar.gz
Download MD5 sum: 62a0427c6ff3a273aa720e27da166758
Download size: 788 KB
Estimated disk space required: 14 MB
Estimated build time: 0.1 SBU
Sample AAC file: https://www.nch.com.au/acm/sample.aac (7 KB)
User Notes: https://wiki.linuxfromscratch.org/blfs/wiki/faad2
Install FAAD2 by running the following commands:
./bootstrap && ./configure --prefix=/usr --disable-static && make
This package does not come with a test suite. However, basic functionality can be tested by decoding the sample AAC file:
./frontend/faad -o sample.wav ../sample.aac
This should display a copyright message and the following information about the sample file:
sample.aac file info:
ADTS, 4.608 sec, 13 kbps, 16000 Hz
---------------------
| Config: 2 Ch |
---------------------
| Ch | Position |
---------------------
| 00 | Left front |
| 01 | Right front |
---------------------
Now play the result (requires the aplay program from the alsa-utils-1.2.8 package):
aplay sample.wav
aplay should identify the file as “Signed 16 bit Little Endian, Rate 16000 Hz, Stereo”, and you should hear some piano notes.
Now, as the root
user:
make install
--disable-static
: This
switch prevents installation of static versions of the libraries.