r767 - in x86/trunk/packages: module-init-tools msmtp nALFS nALFS-profile nano ncftp ncurses openssh openssl pango patch pciutils perl pkgconfig popt portmap ppp procps psmisc readline

justin at linuxfromscratch.org justin at linuxfromscratch.org
Sat Sep 24 23:19:11 PDT 2005


Author: justin
Date: 2005-09-25 00:19:08 -0600 (Sun, 25 Sep 2005)
New Revision: 767

Modified:
   x86/trunk/packages/module-init-tools/Makefile
   x86/trunk/packages/msmtp/Makefile
   x86/trunk/packages/nALFS-profile/Makefile
   x86/trunk/packages/nALFS/Makefile
   x86/trunk/packages/nano/Makefile
   x86/trunk/packages/ncftp/Makefile
   x86/trunk/packages/ncurses/Makefile
   x86/trunk/packages/openssh/Makefile
   x86/trunk/packages/openssl/Makefile
   x86/trunk/packages/pango/Makefile
   x86/trunk/packages/patch/Makefile
   x86/trunk/packages/pciutils/Makefile
   x86/trunk/packages/perl/Makefile
   x86/trunk/packages/pkgconfig/Makefile
   x86/trunk/packages/popt/Makefile
   x86/trunk/packages/portmap/Makefile
   x86/trunk/packages/ppp/Makefile
   x86/trunk/packages/procps/Makefile
   x86/trunk/packages/psmisc/Makefile
   x86/trunk/packages/readline/Makefile
Log:
Messages/Logging update for packages from module-init-tools to readline.

Modified: x86/trunk/packages/module-init-tools/Makefile
===================================================================
--- x86/trunk/packages/module-init-tools/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/module-init-tools/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Module-Init-Tools Makefile
-#==============================================================================
 
 NM= module-init-tools
 VRS= 3.1
@@ -10,48 +9,23 @@
 SHA-$(FILE)= f233cab26208aa7d21a8ca24e4a9712af23a5a1d
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-post-bash) \
+	chroot "$(MP)" $(chenv-post-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@touch modprobe.conf.5
-	@./configure --prefix="" --enable-zlib >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	touch modprobe.conf.5
+	./configure --prefix="" --enable-zlib
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/msmtp/Makefile
===================================================================
--- x86/trunk/packages/msmtp/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/msmtp/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # msmtp Makefile
-#==============================================================================
 
 NM= msmtp
 VRS= 1.4.0
@@ -10,47 +9,22 @@
 SHA-$(FILE)= b3b202883831d62d53d8cc7347fe5b654d6ed38f
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-post-bash) \
+	chroot "$(MP)" $(chenv-post-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr --sysconfdir=/etc >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr --sysconfdir=/etc
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/nALFS/Makefile
===================================================================
--- x86/trunk/packages/nALFS/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/nALFS/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # nALFS Makefile
-#==============================================================================
 
 NM= nALFS
 VRS= 1.2.4
@@ -10,48 +9,23 @@
 SHA-$(FILE)= e9847c5830f2b1c5a89fe3bb7fa397648b4099e7
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build) 
+	$(std_build) 
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr --with-libxml2 \
-	 --with-curl --with-ssl >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr --with-libxml2 \
+	 --with-curl --with-ssl
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: compile-stage1 clean chroot compile-stage2

Modified: x86/trunk/packages/nALFS-profile/Makefile
===================================================================
--- x86/trunk/packages/nALFS-profile/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/nALFS-profile/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # nALFS profile Makefile
-#==============================================================================
 
 NM= profile
 VRS= LFS-6.1
@@ -10,30 +9,21 @@
 SHA-$(FILE)= e4be78e5de2e71ba7b48013483142aa62fc7283f
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@sed -i 's@/your/$(DIR)/packages@/sources at g' config/general.ent
-	@cp -rav . /root/nALFS-profile-$(DIR) >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	sed -i 's@/your/$(DIR)/packages@/sources at g' config/general.ent
+	cp -rav . /root/nALFS-profile-$(DIR)
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/nano/Makefile
===================================================================
--- x86/trunk/packages/nano/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/nano/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Nano Makefile
-#==============================================================================
 
 NM= nano
 VRS= 1.2.5
@@ -10,51 +9,26 @@
 SHA-$(FILE)= a3f332a43abedd5467da8808de90b53ae98fa5e0
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr --sysconfdir=/etc --enable-color \
-	 --enable-multibuffer --enable-nanorc >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-	@mkdir -p /usr/share/doc/nano/examples
-	@cp nanorc.sample /usr/share/doc/nano/examples
-	@cp $(ROOT)/etc/nanorc /etc
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr --sysconfdir=/etc --enable-color \
+	 --enable-multibuffer --enable-nanorc
+	make $(PM)
+	make install
+	mkdir -p /usr/share/doc/nano/examples
+	cp nanorc.sample /usr/share/doc/nano/examples
+	cp $(ROOT)/etc/nanorc /etc
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/ncftp/Makefile
===================================================================
--- x86/trunk/packages/ncftp/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/ncftp/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # ncftp Makefile
-#==============================================================================
 
 NM= ncftp
 VRS= 3.1.9
@@ -10,49 +9,24 @@
 SHA-$(FILE)= 052be99800b740a50b31619ccd65fd4f082a3386
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make -C libncftp shared >>../$(DIR)-$@.log 2>&1
-	@make -C libncftp soinstall >>../$(DIR)-$@.log 2>&1
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr
+	make -C libncftp shared
+	make -C libncftp soinstall
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/ncurses/Makefile
===================================================================
--- x86/trunk/packages/ncurses/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/ncurses/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Ncurses Makefile
-#==============================================================================
 
 NM= ncurses
 VRS= 5.4
@@ -14,91 +13,41 @@
 SHA-$(PATCH1)= 7da2e2ae84d49466ff777b4d815318391776e21b
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 stage1: $(FILE)
-	@$(std_build)
-	@cp $(SRC)/$(FILE) $(LFSSRC)
+	$(std_build)
+	cp $(SRC)/$(FILE) $(LFSSRC)
 
 compile-stage1:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=$(WD) --with-shared --without-debug \
-	 --without-ada --enable-overwrite >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make sources >>../$(DIR)-$@.log 2>&1
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
+	./configure --prefix=$(WD) --with-shared --without-debug \
+	 --without-ada --enable-overwrite
+	make sources
+	make $(PM)
+	make install
 
 chroot:
-	@chroot "$(MP)" $(chenv-pre-bash) \
+	chroot "$(MP)" $(chenv-pre-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-pre-bash)'
 
 stage2: Makefile $(FILE) $(PATCH1)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@bzcat ../$(PATCH1) > update.sh
-	@sh update.sh
-	@./configure --prefix=/usr --with-shared --without-debug --with-gpm \
-	 >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make sources >>../$(DIR)-$@.log 2>&1
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-	@chmod 755 /usr/lib/*.5.4
-	@chmod 644 /usr/lib/libncurses++.a && mv /usr/lib/libncurses.so.5* /lib
-	@ln -sf ../../lib/libncurses.so.5 /usr/lib/libncurses.so
-	@ln -sf libncurses.so /usr/lib/libcurses.so
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	bzcat ../$(PATCH1) > update.sh
+	sh update.sh
+	./configure --prefix=/usr --with-shared --without-debug --with-gpm
+	make sources
+	make $(PM)
+	make install
+	chmod 755 /usr/lib/*.5.4
+	chmod 644 /usr/lib/libncurses++.a && mv /usr/lib/libncurses.so.5* /lib
+	ln -sf ../../lib/libncurses.so.5 /usr/lib/libncurses.so
+	ln -sf libncurses.so /usr/lib/libcurses.so
 
 clean:
-	@-rm -rf $(DIR)
-	@rm -f update.sh 
+	-rm -rf $(DIR)
+	rm -f update.sh 
 
 .PHONY: compile-stage1 clean chroot compile-stage2

Modified: x86/trunk/packages/openssh/Makefile
===================================================================
--- x86/trunk/packages/openssh/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/openssh/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,63 +1,36 @@
 # OpenSSH Makefile
-#==============================================================================
 
 NM= openssh
-VRS= 4.1p1
+VRS= 4.2p1
 DIR= $(NM)-$(VRS)
 
-FILE= $(DIR).tar.bz2
-URL-$(FILE)= $(HTTPBLFS)/M-P/$(FILE)
-SHA-$(FILE)= 7226920d228a2160a0ed1ccd9a607c6ca89f71e0
+FILE= $(DIR).tar.gz
+URL-$(FILE)= http://sunsite.ualberta.ca/pub/OpenBSD/OpenSSH/portable/$(FILE)
+SHA-$(FILE)= 5e7231cfa8ec673ea856ce291b78fac8b380eb78
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@install -v -d -m700 /var/lib/sshd >../$(DIR)-$@.log 2>&1
-	@chown root:sys /var/lib/sshd
-	@groupadd sshd
-	@useradd -c sshd -d /var/lib/sshd -g sshd -s /bin/false sshd
-	@sed -i "s:-lcrypto:/usr/lib/libcrypto.a:g" configure
-	@./configure --prefix=/usr --sysconfdir=/etc/ssh --libexecdir=/usr/sbin \
-	 --with-md5-passwords --with-privsep-path=/var/lib/sshd \
-	 >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install-nokeys >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	install -v -d -m700 /var/lib/sshd
+	chown root:sys /var/lib/sshd
+	groupadd sshd
+	useradd -c sshd -d /var/lib/sshd -g sshd -s /bin/false sshd
+	sed -i "s:-lcrypto:/usr/lib/libcrypto.a:g" configure
+	./configure --prefix=/usr --sysconfdir=/etc/ssh --libexecdir=/usr/sbin \
+	 --with-md5-passwords --with-privsep-path=/var/lib/sshd
+	make $(PM)
+	make install-nokeys
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/openssl/Makefile
===================================================================
--- x86/trunk/packages/openssl/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/openssl/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # OpenSSL Makefile
-#==============================================================================
 
 NM= openssl
 VRS= 0.9.7g
@@ -14,51 +13,26 @@
 SHA-$(PATCH1)= 723f730aff3c8d493f5e22bcb70734f48cfb41f4
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE) $(PATCH1)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@patch -Np1 -i ../$(PATCH1) >../$(DIR)-$@.log 2>&1
-	@./config --openssldir=/etc/ssl --prefix=/usr shared >>../$(DIR)-$@.log 2>&1
-	@sed -i 's/mcpu=pentium/mtune=i486/' Configure
-	@sed -i 's/mcpu=pentium/mtune=i486/' Makefile
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) MANDIR=/usr/share/man >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make MANDIR=/usr/share/man install >>../$(DIR)-$@.log 2>&1
-	@cp -r certs /etc/ssl
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	patch -Np1 -i ../$(PATCH1)
+	./config --openssldir=/etc/ssl --prefix=/usr shared
+	sed -i 's/mcpu=pentium/mtune=i486/' Configure
+	sed -i 's/mcpu=pentium/mtune=i486/' Makefile
+	make $(PM) MANDIR=/usr/share/man
+	make MANDIR=/usr/share/man install
+	cp -r certs /etc/ssl
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/pango/Makefile
===================================================================
--- x86/trunk/packages/pango/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/pango/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Pango Makefile
-#==============================================================================
 
 NM= pango
 VRS= 1.8.1
@@ -10,47 +9,22 @@
 SHA-$(FILE)= 46d6992cd5782a3ca7623f0d91f31b6bdffb0346
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/patch/Makefile
===================================================================
--- x86/trunk/packages/patch/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/patch/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Patch Makefile
-#==============================================================================
 
 NM= patch
 VRS= 2.5.4
@@ -10,82 +9,31 @@
 SHA-$(FILE)= 0282d048ff6ebd06cb92adc06b49932ec71c382f
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 stage1: $(FILE)
-	@$(std_build)
-	@cp $(SRC)/$(FILE) $(LFSSRC)
+	$(std_build)
+	cp $(SRC)/$(FILE) $(LFSSRC)
 
 compile-stage1:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@CPPFLAGS=-D_GNU_SOURCE ./configure --prefix=$(WD) \
-	 >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
+	CPPFLAGS=-D_GNU_SOURCE ./configure --prefix=$(WD)
+	make $(PM)
+	make install
 
 chroot:
-	@chroot "$(MP)" $(chenv-post-bash) \
+	chroot "$(MP)" $(chenv-post-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@CPPFLAGS=-D_GNU_SOURCE ./configure --prefix=/usr \
-	 >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	CPPFLAGS=-D_GNU_SOURCE ./configure --prefix=/usr
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: compile-stage1 clean chroot compile-stage2

Modified: x86/trunk/packages/pciutils/Makefile
===================================================================
--- x86/trunk/packages/pciutils/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/pciutils/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # PCI Utilities Makefile
-#==============================================================================
 
 NM= pciutils
 VRS= 2.1.11
@@ -10,39 +9,22 @@
 SHA-$(FILE)= fa561d97033d8992d2b20c5ca928e6a2ac9ebcfb
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make PREFIX=/usr >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make PREFIX=/usr install >>../$(DIR)-$@.log 2>&1
-	@update-pciids
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	make PREFIX=/usr
+	make PREFIX=/usr install
+	update-pciids
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/perl/Makefile
===================================================================
--- x86/trunk/packages/perl/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/perl/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Perl Makefile
-#==============================================================================
 
 NM= perl
 VRS= 5.8.7
@@ -14,85 +13,34 @@
 SHA-$(PATCH1)= e515154714acdbb1dbdbeb71727649895e26f50d
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 stage1: $(FILE) $(PATCH1)
-	@$(std_build)
-	@cp $(SRC)/{$(FILE),$(PATCH1)} $(LFSSRC)
+	$(std_build)
+	cp $(SRC)/{$(FILE),$(PATCH1)} $(LFSSRC)
 
 compile-stage1:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@patch -Np1 -i ../$(PATCH1)
-	@./configure.gnu --prefix=$(WD) -Dstatic_ext='IO Fcntl POSIX' \
-	 >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make perl utilities >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@cp perl pod/pod2man $(WD)/bin
-	@mkdir -p $(WD)/lib/perl5/$(VRS)
-	@cp -R lib/* $(WD)/lib/perl5/$(VRS)
-#
-#==Status Messages==========================================
-#
-	@$(OK)
+	patch -Np1 -i ../$(PATCH1)
+	./configure.gnu --prefix=$(WD) -Dstatic_ext='IO Fcntl POSIX'
+	make perl utilities
+	cp perl pod/pod2man $(WD)/bin
+	mkdir -p $(WD)/lib/perl5/$(VRS)
+	cp -R lib/* $(WD)/lib/perl5/$(VRS)
 
 chroot:
-	@chroot "$(MP)" $(chenv-pre-bash) \
+	chroot "$(MP)" $(chenv-pre-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-pre-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure.gnu --prefix=/usr -Dpager="/bin/less -isR" \
-	 >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure.gnu --prefix=/usr -Dpager="/bin/less -isR"
+	make
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: compile-stage1 clean chroot compile-stage2

Modified: x86/trunk/packages/pkgconfig/Makefile
===================================================================
--- x86/trunk/packages/pkgconfig/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/pkgconfig/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Pkgconfig Makefile
-#==============================================================================
 
 NM= pkg-config
 VRS= 0.19
@@ -10,47 +9,22 @@
 SHA-$(FILE)= b09fa43dcc44fe0db8df1c4994a8ff9eab371666
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/popt/Makefile
===================================================================
--- x86/trunk/packages/popt/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/popt/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # popt Makefile
-#==============================================================================
 
 NM= popt
 VRS= 1.7
@@ -14,52 +13,27 @@
 SHA-$(PATCH1)= 774d7b2ea41128ca8b46bc834f3de1052c4fb9dc
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE) $(PATCH1)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@bzcat ../$(PATCH1) > ../$(DIR)-5.diff
-	@patch -Np1 -i ../$(DIR)-5.diff
-	@./configure --prefix=/usr >../$(DIR)-$@.log 2>&1
-	@cp configure.in configure.ac
-	@touch configure.in configure.ac
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	bzcat ../$(PATCH1) > ../$(DIR)-5.diff
+	patch -Np1 -i ../$(DIR)-5.diff
+	./configure --prefix=/usr
+	cp configure.in configure.ac
+	touch configure.in configure.ac
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
-	@-rm -f $(DIR)-5.diff
+	-rm -rf $(DIR)
+	-rm -f $(DIR)-5.diff
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/portmap/Makefile
===================================================================
--- x86/trunk/packages/portmap/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/portmap/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # portmap Makefile
-#==============================================================================
 
 NM= portmap
 VRS= 5beta
@@ -18,40 +17,23 @@
 SHA-$(PATCH2)= f9451c5a81006a6ae21358c9498ac9d26b93ff4e
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE) $(PATCH1) $(PATCH2)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@patch -Np1 -i ../$(PATCH1)
-	@patch -Np1 -i ../$(PATCH2)
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	patch -Np1 -i ../$(PATCH1)
+	patch -Np1 -i ../$(PATCH2)
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/ppp/Makefile
===================================================================
--- x86/trunk/packages/ppp/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/ppp/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # ppp Makefile
-#==============================================================================
 
 NM= ppp
 VRS= 2.4.3
@@ -10,49 +9,24 @@
 SHA-$(FILE)= 7f3840464639f3575d08f9394cfbce65b1956aa8
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-blfs) \
+	chroot "$(MP)" $(chenv-blfs) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-	@cp -a $(ROOT)/etc/ppp /etc
-	@chown -R 0:0 /etc/ppp
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr
+	make $(PM)
+	make install
+	cp -a $(ROOT)/etc/ppp /etc
+	chown -R 0:0 /etc/ppp
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/procps/Makefile
===================================================================
--- x86/trunk/packages/procps/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/procps/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Procps Makefile
-#==============================================================================
 
 NM= procps
 VRS= 3.2.5
@@ -10,38 +9,21 @@
 SHA-$(FILE)= 188d0ccd6c7a655ae556fe1078c346cda1aca164
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-post-bash) \
+	chroot "$(MP)" $(chenv-post-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	make $(PM)
+	make install
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/psmisc/Makefile
===================================================================
--- x86/trunk/packages/psmisc/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/psmisc/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Psmisc Makefile
-#==============================================================================
 
 NM= psmisc
 VRS= 21.6
@@ -10,49 +9,24 @@
 SHA-$(FILE)= c23b3cd41ed8e4d599dd4f2dfc22e397fc1351cf
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-post-bash) \
+	chroot "$(MP)" $(chenv-post-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-post-bash)'
 
 stage2: Makefile $(FILE)
-	@$(std_build)
+	$(std_build)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@./configure --prefix=/usr --exec-prefix="" >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-	@mv /bin/pstree* /usr/bin
-	@ln -sf pstree /usr/bin/pstree.x11
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	./configure --prefix=/usr --exec-prefix=""
+	make $(PM)
+	make install
+	mv /bin/pstree* /usr/bin
+	ln -sf pstree /usr/bin/pstree.x11
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2

Modified: x86/trunk/packages/readline/Makefile
===================================================================
--- x86/trunk/packages/readline/Makefile	2005-09-25 05:14:42 UTC (rev 766)
+++ x86/trunk/packages/readline/Makefile	2005-09-25 06:19:08 UTC (rev 767)
@@ -1,5 +1,4 @@
 # Readline Makefile
-#==============================================================================
 
 NM= readline
 VRS= 5.0
@@ -14,53 +13,28 @@
 SHA-$(PATCH1)= 085d0d973d1a39707c26454db1d414957a85e2d0
 
 # Targets
-# =============================================================================
 
 include $(ROOT)/scripts/functions
 
 chroot:
-	@chroot "$(MP)" $(chenv-pre-bash) \
+	chroot "$(MP)" $(chenv-pre-bash) \
 	'cd $(ROOT) && make ch-$(NM) $(chbash-pre-bash)'
 
 stage2: Makefile $(FILE) $(PATCH1)
-	@$(std_build)
-	@cp $(SRC)/{$(FILE),$(PATCH1)} $(LFSSRC)
+	$(std_build)
+	cp $(SRC)/{$(FILE),$(PATCH1)} $(LFSSRC)
 
 compile-stage2:
-	@$(call echo_message, Configuring)
-#==============================================================================
-# Configure commands below \/
-#==============================================================================
-	@patch -Np1 -i ../$(PATCH1)
-	@./configure --prefix=/usr --libdir=/lib >../$(DIR)-$@.log 2>&1
-#
-#==Status Messages==========================================
-#
-	@$(OK)
-	@$(call echo_message, Making)
-#==============================================================================
-# Make commands below \/
-#==============================================================================
-	@make $(PM) SHLIB_XLDFLAGS=-lncurses >>../$(DIR)-$@.log 2>&1
-#
-#==Status Messages===========================================
-#
-	@$(OK)
-	@$(call echo_message, Installing)
-#==============================================================================
-# Install commands below \/
-#==============================================================================
-	@make install >>../$(DIR)-$@.log 2>&1
-	@chmod 755 /lib/lib{readline,history}.so*
-	@rm /lib/lib{readline,history}.so
-	@ln -sf ../../lib/libreadline.so.5 /usr/lib/libreadline.so
-	@ln -sf ../../lib/libhistory.so.5 /usr/lib/libhistory.so
-#
-#==Status Messages===========================================
-#
-	@$(OK)
+	patch -Np1 -i ../$(PATCH1)
+	./configure --prefix=/usr --libdir=/lib
+	make $(PM) SHLIB_XLDFLAGS=-lncurses
+	make install
+	chmod 755 /lib/lib{readline,history}.so*
+	rm /lib/lib{readline,history}.so
+	ln -sf ../../lib/libreadline.so.5 /usr/lib/libreadline.so
+	ln -sf ../../lib/libhistory.so.5 /usr/lib/libhistory.so
 
 clean:
-	@-rm -rf $(DIR)
+	-rm -rf $(DIR)
 
 .PHONY: clean chroot compile-stage2




More information about the livecd mailing list