[lfs-support] What Is "The" LFS Partition?
AFeuerbacher at ALLEGROMICRO.com
Mon Nov 5 08:47:48 PST 2012
Philippe Delavalade wrote:
> > I read the man page for mke2fs and it's as clear as mud. And the LFS
> > book is completely unclear about exactly what is going on.
> The book suppose that you have some knowledge about linux and
Well I do have *some* knowledge. It's just a matter of how much. :-)
Seriously, I'm doing this in order to learn about all this stuff.
> And the man about mke2fs is not so unclear, as I can remember.
It is to me. I'll have to think a lot more about what you and Bruce have told me, in terms of the mke2fs man page, and try to understand what I'm missing.
> > Are you saying that I have to run mke2fs for EACH of the devices
> /dev/sda1, /dev/sda2 and so forth?
> You'll have to do it for /dev/sda6 and for /dev/sda7 ; on sda2, I think
> you plane to install your home and that can wait ; for /dev/sda1 I
> think you can wait still the installation of the bootloader ; and
> /dev/sda5 is the swap, you'll see what to do with it at the end of your
> current section.
My plan WAS to have /dev/sda1 as the /boot partition, and the rest as whatever fdisk forces you to have. After some experimentation and absorbing the material in the LFS book, I hit on this:
/dev/sda1 /boot 500M
/dev/sda2 extended partition containing everything else
/dev/sda5 swap 32G (I have 16G of RAM)
and so forth, following the LFS book.
Why would I NOT use mke2fs immediately to make filesystems on sda1, sda2 and sda5? I want to know enough to really understand what is going on sufficiently that I could teach it to my grandmother. :-)
Why would I wait until the installation of the bootloader? Wait for what?
> Anyway, there is certainly a swap partition on your
> host system.
Yes, but what does that have to do with the LFS system?
> > I already know (please excuse my ignorance) that running mke2fs with
> > /dev/sda completely wipes out the partitions I just made, so that's
> > obviously not supposed to be done.
> Rigth :-)
Ok, then: how does one get that information from the man page on mke2fs?
> > > IMHO, the /boot can wait but you'll have to take it in
> > > later.
> > I don't understand this at all. Later we mount the various
> > Is that what you're referring to?
> The /boot is not used until installing grub or lilo. Maybe, an ext2
> could be better for this little partition. For your home, if I guess
> what you want to do, I mean for sda2, maybe you can use ext4.
OK, but the LFS book clearly says that every partition will be ext3. Je ne comprends pas.
More information about the lfs-support