Can we discuss about Kernel support USB storages device? Thanks.

Jim Gifford lfs at jg555.com
Fri Feb 25 19:44:59 PST 2005


Bluesheet wrote:

>Dear all,
>I have a problem about kernel support USB storages, Can we discuss in here?
>Thanks.
>
>My discussion subject is kernel option on USB storages.
>I want to add USB storages on my kernel 2.4.x, but I have a problem after I
>build different version of kernel.
>I built 2.4.26, it can support USB storages but when I built kernel 2.4.24,
>it can't. Both setting are the same, so I want to know the actual kernel
>setting needed for USB storages. I know that USB storages need SCSI module
>and USB mass storage module, so I already add this two option in kernel
>setting with modules, the following is the snapshot of SCSI and USB setting.
>
>==========================================
> <*> SCSI support
>--- SCSI support type (disk, tape, CD-ROM)
><M>   SCSI disk support
>(40) Maximum number of SCSI disks that can be loaded as modules
><M>   SCSI tape support
>< >   SCSI OnStream SC-x0 tape support
><M>   SCSI CD-ROM support
>[ ]     Enable vendor-specific extensions (for SCSI CDROM)
>(2) Maximum number of CDROM devices that can be loaded as modules
>< >   SCSI generic support
>--- Some SCSI devices (e.g. CD jukebox) support multiple LUNs
>[*]   Enable extra checks in new queueing code
>[*]   Probe all LUNs on each SCSI device
>[*]   Verbose SCSI error reporting (kernel size +=12K)
>[ ]   SCSI logging facility
>SCSI low-level drivers  --->
>==========================================
> <M> Support for USB
>[ ]   USB verbose debug messages
>--- Miscellaneous USB options
>[*]   Preliminary USB device filesystem
>[ ]   Enforce USB bandwidth allocation (EXPERIMENTAL)
>--- USB Host Controller Drivers
><M>   EHCI HCD (USB 2.0) support (EXPERIMENTAL)
><M>   UHCI (Intel PIIX4, VIA, ...) support
><M>   UHCI Alternate Driver (JE) support
><M>   OHCI (Compaq, iMacs, OPTi, SiS, ALi, ...) support
>< >   SL811HS Alternate (x86, StrongARM, isosynchronous mode)
>< >   SL811HS (x86, StrongARM) support, old driver
>--- USB Device Class drivers
>< >   USB Audio support
>< >   USB Bluetooth support (EXPERIMENTAL)
>< >   USB MIDI support
><M>   USB Mass Storage support
>[ ]     USB Mass Storage verbose debug
>[ ]     Datafab MDCFE-B Compact Flash Reader support
>[ ]     Freecom USB/ATAPI Bridge support
>
>[ ]     ISD-200 USB/ATA Bridge support
>[ ]     Microtech CompactFlash/SmartMedia support
>[ ]     HP CD-Writer 82xx support
>[ ]     SanDisk SDDR-09 (and other SmartMedia) support
>[ ]     SanDisk SDDR-55 SmartMedia support
>[ ]     Lexar Jumpshot Compact Flash Reader
>< >   USB Modem (CDC ACM) support
>==========================================
>
>During building the kernel, I found there have two situation failed in using
>USB drive/USB flash disk.
>1/ Plug-in the USB drive/USB flash disk, the system didn't detect the
>device, so using "lsmod", didn't load usb-storage module.
>2/ Plug-in the USB drive/USB flash disk, the system can detect the device,
>using "lsmod", usb-storage loaded into system, but when I mount the usb
>device, it occure " mount: /dev/sda1 is not a valid block device".
>
>and loaded modules when the system being started.
> Module                  Size  Used by    Not tainted
>soundcore               5860     0  (autoclean)
>serial                      52004   0  (autoclean)
>8139too                 17224    1
>mii                         3700     0  [8139too]
>crc32                     3592      0  [8139too]
>keybdev                 2944      0  (unused)
>mousedev              5556      1
>hid                        24676    0  (unused)
>input                     5312      0  [keybdev mousedev hid]
>usb-uhci                26348     0  (unused)
>ehci-hcd                20200     0  (unused)
>usbcore                 76288     1  [hid usb-uhci ehci-hcd]
>ext3                      72964     2
>jbd                       59288     2  [ext3]
>
>Dear all, I want to learn more about kernel. can anyone give me some
>suggestions or we can discuss this issue. Thanks.
>Regards.
>
>
>  
>
You have to have your module configure file setup correctly, or make 
sure you have hotplug setup in both your kernel and the hotplug package. 
If you want to do it manually you need to modprobe the usb-storage driver.



-- 
------
jim at linuxfromscratch.org
lfs at jg555.com

LFS User # 2577
Registered Linux User # 299986




More information about the lfs-support mailing list