unforseen error in /etc/rc.d/rcsysinit.d/S40mountfs!!!!!!

faza faza000 at op.pl
Tue Mar 2 18:13:06 PST 2004


Nathan Coulson wrote:

>>Nathan Coulson wrote:
>>
>>>>so my /etc/fstab looks like this:
>>>>
>>>>#begin /etc/fstab
>>>>
>>>># filesystem  mount-point    fs-type  options         dump   fsck-order
>>>>
>>>>/dev/hdb1     /              ext2     defaults        1      1
>>>>/dev/hdb2     swap           swap     pri=1           0      0
>>>>proc          /proc          proc     defaults        0      0
>>>>devpts        /dev/pts       devpts   gid=4,mode=620  0      0
>>>>shm           /dev/shm       tmpfs    defaults        0      0
>>>>#usbfs         /proc/bus/usb  usbfs    defaults        0      0
>>>>
>>>>#end /etc/fstab
>>>>
>>>>i set the fs-type to ext2, should i follow the books example and set
>>>>reiserfs???
>>>>
>>>>
>>>>and the partiton skeme:(i hope u have mean that, couse i'm not sure if
>>>>there is a diffrence betwen a skeme and table)
>>>>
>>>>
>>>>Disk /dev/hdb: 255 heads, 63 sectors, 4865 cylinders
>>>>Units = cylinders of 16065 * 512 bytes
>>>>
>>>>   Device Boot    Start       End    Blocks   Id  System
>>>>/dev/hdb1   *         1       510   4096543+  83  Linux
>>>>/dev/hdb2           511       608    787185   82  Linux swap
>>>>/dev/hdb3           609      4865  34194352+   f  Win95 Ext'd (LBA)
>>>>/dev/hdb5           609      4865  34194321    c  Win95 FAT32 (LBA)
>>>
>>>
>>>that is what it meant, [and table's probably the technical term].
>>>
>>>well, everything looks correct...  can I see /boot/grub/menu.lst as
>>>well?
>>
>>
>>the /boot/grub/menu.lst looks like this:
>>
>>
>>#
>>       #
>>#                                menu.lst
>>       #
>>#
>>       #
>>###############################################################################
>>
>>
>>#------------------- by default boot the 4th list entry
>>
>>default=3
>>
>>#---------------- allow 10 seconds befor booting the default
>>
>>timeout=10
>>
>>#-------------------------- use preetier colors
>>
>>color green/black light-green/black
>>
>>#-----------------------------------------------------------------------------#
>>
>>###############################################################################
>>
>>#.............................................................................#
>>
>>title Red Hat Linux (2.4.18-14)
>>
>>	root (hd1,1)
>>	kernel /boot/vmlinuz-2.4.18-14 ro root=LABEL=/1 hda=ide-scsi
>>ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0
>>ide6=0 ide7=0 ide8=0 ide9=0
>>	initrd /boot/initrd-2.4.18-14.img
>>
>>#.............................................................................#
>>
>>title LFS 5.0 Linux (2.4.22)  ---> tests
>>
>>	root (hd0,0)
>>	kernel (hd0,0)/boot/lfskernel root=/dev/hdb1 ro
>>
>>#.............................................................................#
>>
>>title Red Hat Linux (2.4.20)  ---> <ISDN + NETWORK> build in
>>
>>	root (hd1,1)
>>	kernel /boot/vmlinuz-2.4.20-final ro root=/dev/sda2 ide0=0x1f0,0x3f6,14
>>ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0
>>ide9=0
>>	initrd /boot/initrd-2.4.20.img
>>
>>#.............................................................................#
>>
>>title Windows XP
>>
>>	map (hd0,0) (hd1,0)
>>	map (hd1,0) (hd0,0)
>>	rootnoverify (hd1,0)
>>	chainloader +1
>>
>>
>>#.............................................................................#
>>
>>
>>i have build the system  from the red hat linux (2.4.18-14) distro
>>but when i was building it my drive (the lfs drive) was atached to the
>>promise udma100 controler on my asus a7v board and the value for ide4
>>was -> ide4=0x6000,0x05802,10 so:
>>
>>during the whole build the drive was something like on /dev/hdi
>>with the lfs partition hdi1 and swap hdi2
>>
>>also i had probs with installing grub cause in my chroot env after
>>typing "grub"
>>
>>root ( "tab"
>>
>>grub recognized only my raid aray so the output was only hd0,
>>but i had the lfs on hd1
>>
>>i had to install grub from the floppy disk
>>
>>after that booting was fine but i had instead of this error
>>
>>i mean the "unforseen error
>>
>>also another one wich exited witch the value 255
>>
>>and also the login prob
>>
>>
>>so i atached the drive to the stnd controller on my board,
>>changed the values in /etc/fstab to hdb1 and hdb2
>>
>>got rid of the 255 error (was something like /dev/hdi1 /dev/hdi2 :
>>no such file or directory)
>>
>>but still having this one.....
>>
>>maybe this will help couse im still not sure if my raid configuration
>>and the udma100 controller(wich is known for strange behavior)
>>didnt mase up the whole build
> 
> 
> I am sorry, but I am not sure what the problem is.  [Perhaps someone else
> can give more advice].
> 
> Everything looks fine,  and obviously it is using the LFS Bootscripts, 
> [implies right rootdir]


well, ... :(
thats to bad

any sugestions who exectly could give me some answers
or maybe should i just try tomorrow posting that prob to the newsgruops 
list again???




More information about the lfs-support mailing list