unforseen error in /etc/rc.d/rcsysinit.d/S40mountfs!!!!!!

faza faza000 at op.pl
Tue Mar 2 17:50:08 PST 2004


Nathan Coulson wrote:
>>so my /etc/fstab looks like this:
>>
>>#begin /etc/fstab
>>
>># filesystem  mount-point    fs-type  options         dump   fsck-order
>>
>>/dev/hdb1     /              ext2     defaults        1      1
>>/dev/hdb2     swap           swap     pri=1           0      0
>>proc          /proc          proc     defaults        0      0
>>devpts        /dev/pts       devpts   gid=4,mode=620  0      0
>>shm           /dev/shm       tmpfs    defaults        0      0
>>#usbfs         /proc/bus/usb  usbfs    defaults        0      0
>>
>>#end /etc/fstab
>>
>>i set the fs-type to ext2, should i follow the books example and set
>>reiserfs???
>>
>>
>>and the partiton skeme:(i hope u have mean that, couse i'm not sure if
>>there is a diffrence betwen a skeme and table)
>>
>>
>>Disk /dev/hdb: 255 heads, 63 sectors, 4865 cylinders
>>Units = cylinders of 16065 * 512 bytes
>>
>>    Device Boot    Start       End    Blocks   Id  System
>>/dev/hdb1   *         1       510   4096543+  83  Linux
>>/dev/hdb2           511       608    787185   82  Linux swap
>>/dev/hdb3           609      4865  34194352+   f  Win95 Ext'd (LBA)
>>/dev/hdb5           609      4865  34194321    c  Win95 FAT32 (LBA)
> 
> 
> that is what it meant, [and table's probably the technical term].
> 
> well, everything looks correct...  can I see /boot/grub/menu.lst as well?


the /boot/grub/menu.lst looks like this:


# 
       #
#                                menu.lst 
       #
# 
       #
###############################################################################


#------------------- by default boot the 4th list entry

default=3

#---------------- allow 10 seconds befor booting the default

timeout=10

#-------------------------- use preetier colors

color green/black light-green/black

#-----------------------------------------------------------------------------#

###############################################################################

#.............................................................................#

title Red Hat Linux (2.4.18-14)

	root (hd1,1)
	kernel /boot/vmlinuz-2.4.18-14 ro root=LABEL=/1 hda=ide-scsi 
ide0=0x1f0,0x3f6,14 ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0 
ide6=0 ide7=0 ide8=0 ide9=0
	initrd /boot/initrd-2.4.18-14.img

#.............................................................................#

title LFS 5.0 Linux (2.4.22)  ---> tests

	root (hd0,0)
	kernel (hd0,0)/boot/lfskernel root=/dev/hdb1 ro

#.............................................................................#

title Red Hat Linux (2.4.20)  ---> <ISDN + NETWORK> build in

	root (hd1,1)
	kernel /boot/vmlinuz-2.4.20-final ro root=/dev/sda2 ide0=0x1f0,0x3f6,14 
ide1=0x170,0x376,15 ide2=0 ide3=0 ide4=0 ide5=0 ide6=0 ide7=0 ide8=0 ide9=0
	initrd /boot/initrd-2.4.20.img

#.............................................................................#

title Windows XP

	map (hd0,0) (hd1,0)
	map (hd1,0) (hd0,0)	
	rootnoverify (hd1,0)
	chainloader +1


#.............................................................................#


i have build the system  from the red hat linux (2.4.18-14) distro
but when i was building it my drive (the lfs drive) was atached to the 
promise udma100 controler on my asus a7v board and the value for ide4
was -> ide4=0x6000,0x05802,10 so:

during the whole build the drive was something like on /dev/hdi
with the lfs partition hdi1 and swap hdi2

also i had probs with installing grub cause in my chroot env after 
typing "grub"

root ( "tab"

grub recognized only my raid aray so the output was only hd0,
but i had the lfs on hd1

i had to install grub from the floppy disk

after that booting was fine but i had instead of this error

i mean the "unforseen error

also another one wich exited witch the value 255

and also the login prob


so i atached the drive to the stnd controller on my board,
changed the values in /etc/fstab to hdb1 and hdb2

got rid of the 255 error (was something like /dev/hdi1 /dev/hdi2 :
no such file or directory)

but still having this one.....

maybe this will help couse im still not sure if my raid configuration 
and the udma100 controller(wich is known for strange behavior)
didnt mase up the whole build



















More information about the lfs-support mailing list