PCMCIA troubles

Aleksandr Guidrevitch izlam at mail.ru
Wed Jan 8 08:36:32 PST 2003


Hello, All

I have Xircom CBEM56G CardBus Ethernet 10/100 + Modem 56 pcmcia card.
I've installed pcmcia-cs package on a Dell CPTs laptop running (almost) 
fresh LFS 4.0. When I run `/etc/rc.d/init.d/pcmcia start` (retyping from 
the laptop, since it has no internet connectivity):


-------------------------------------
#/etc/rc.d/init.d/pcmcia start
Starting PCMCIA services: Linux Kernel Card Services 3.1.22
   options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:03.0
PCI: Sharing IRQ 11 with 00:03.1
PCI: Sharing IRQ 11 with 00:07.2
PCI: Found IRQ 11 for device 00:03.1
PCI: Sharing IRQ 11 with 00:03.0
PCI: Sharing IRQ 11 with 00:07.2
Yenta IRQ list 0690, PCI irq11
Socket status: 30000020
Yenta IRQ list 0690, PCI irq11
Socket status: 30000006
cs: cb_alloc(bus 2): vendor 0x115d, device 0x0003
PCI:Enabling device 02:00.0 (0000 -> 0003)
PCI:Enabling device 02:00.1 (0000 -> 0003)
ttyS04 at port 0x4080 (irq = 11) is a 16550A
cardmgr[149]: watching 2 sockets
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0x300-0x307 0x378-0x37f 
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
done.
-------------------------------------
#cat /var/lib/pcmcia/stab
Socket 0: CardBus hotplug device
Socket 1: empty
-------------------------------------

But no ethernet/modem interfaces are brought up :((, so ifconfig only 
shows loopback interface.

I've already looked through google/lfs archives, but haven't found a 
solution :(

I'm a newbie to linux and to LFS (I've installed it with nALFS),

PS. the kernel is compiled with config stolen from my RH7.3.

-- 
Unsubscribe: send email to listar at linuxfromscratch.org
and put 'unsubscribe lfs-support' in the subject header of the message



More information about the lfs-support mailing list