Trouble in starting X

Vijayan Sampath vijayan_ms at yahoo.com
Mon Nov 1 03:48:09 PDT 2027


Hi,

I have trouble starting X after the installation. I had no compile
problems or configuration problems. Could somebody help me in resolving
this error ? I have attached the config file and the error log that
comes when I try xinit.

Vijayan
-- 
Lies have no legs--That's why we all have to stand for them.

P.S : The error is the same even if the ServerLayout section is
uncommented.
-------------- next part --------------
# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
#    SubSection  "extmod"
#      Option    "omit xfree86-dga"   # don't initialise the DGA extension
#    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
#    Load       "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option	"Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc104"
    Option "XkbLayout"	"us"
    Option "XkbOptions"	"grp:switch,ctrl:ctrl_aa,grp_led:scroll"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "Microsoft"
    Option "Device"      "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

    Option "ChordMiddle"

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 48.5

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-110

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier  "My Video Card"
    Driver      "sis"
    VideoRam    8192
    Option "no_accel" # Use this if acceleration is causing problems
    # Option "fifo_moderate" 
    # Option "fifo_conserv" 
    # Option "fifo_aggresive" 
    # Option "fast_vram"
    # Option "pci_burst_on"
    # Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!!
    # Option "ext_eng_queue" # Turbo-queue. This can cause drawing 
                             # errors, but gives some accel
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Driver	"svga"
    Device      "My Video Card"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       24
        Modes       "800x600" "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
#
#Section "ServerLayout"
#
# The Identifier line must be present
#    Identifier  "Simple Layout"
#
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
#
#    Screen "Screen 1"
#
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
#
#    InputDevice "Mouse1" "CorePointer"
#    InputDevice "Keyboard1" "CoreKeyboard"
#
#EndSection


-------------- next part --------------

XFree86 Version 4.0.2 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 18 December 2000
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.8 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov  1 15:03:09 2027
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(WW) No Layout section.  Using the first Screen section.
(**) |-->Screen "svga" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "My Video Card"
(==) |-->Input Device "Mouse1"
(==) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) Option "XkbOptions" "grp:switch,ctrl:ctrl_aa,grp_led:scroll"
(**) XKB: options: "grp:switch,ctrl:ctrl_aa,grp_led:scroll"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.3
	XFree86 XInput driver : 0.1
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6326 card 1039,6326 rev d2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x89 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0xefe00000 - 0xefefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0xe6c00000 - 0xe7cfffff (0x1100000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) SiS 6326 rev 210, Mem @ 0xe7000000/23, 0xefef0000/16, I/O @ 0xcc80/7
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
	[0] -1	0xe8000000 - 0xebffffff (0x4000000) MX[B]
	[1] -1	0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
	[2] -1	0xefef0000 - 0xefefffff (0x10000) MX[B](B)
	[3] -1	0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
	[4] -1	0x0000de00 - 0x0000de1f (0x20) IX[B]
	[5] -1	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[6] -1	0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xe8000000 - 0xebffffff (0x4000000) MX[B]
	[1] -1	0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
	[2] -1	0xefef0000 - 0xefefffff (0x10000) MX[B](B)
	[3] -1	0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
	[4] -1	0x0000de00 - 0x0000de1f (0x20) IX[B]
	[5] -1	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[6] -1	0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xe8000000 - 0xebffffff (0x4000000) MX[B]
	[6] -1	0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
	[7] -1	0xefef0000 - 0xefefffff (0x10000) MX[B](B)
	[8] -1	0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
	[9] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[10] -1	0x0000de00 - 0x0000de1f (0x20) IX[B]
	[11] -1	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[12] -1	0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.1.8
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 0.6.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.1
(II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
	SIS300, SIS630, SIS540
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS6326 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xe8000000 - 0xebffffff (0x4000000) MX[B]
	[6] -1	0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
	[7] -1	0xefef0000 - 0xefefffff (0x10000) MX[B](B)
	[8] -1	0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
	[9] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[10] -1	0x0000de00 - 0x0000de1f (0x20) IX[B]
	[11] -1	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[12] -1	0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xe8000000 - 0xebffffff (0x4000000) MX[B]
	[6] -1	0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
	[7] -1	0xefef0000 - 0xefefffff (0x10000) MX[B](B)
	[8] -1	0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
	[9] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[10] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[11] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[12] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[13] -1	0x0000de00 - 0x0000de1f (0x20) IX[B]
	[14] -1	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[15] -1	0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
	[16] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[17] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(**) SIS(0): Option "NoAccel"
(==) SIS(0): Using HW cursor
(**) SIS(0): Acceleration disabled
(--) SIS(0): Detected memory clock : 55.929MHz
(--) SIS(0): Linear framebuffer at 0xE7000000
(--) SIS(0): MMIO registers at 0xEFEF0000
(--) SIS(0): Relocate IO registers at 0xCC80
(--) SIS(0): VideoRAM: 8192 kByte
(==) SIS(0): Min pixel clock is 16 MHz
(--) SIS(0): Max pixel clock is 175 MHz
(II) SIS(0): My Monitor: Using hsync range of 31.50-48.50 kHz
(II) SIS(0): My Monitor: Using vrefresh range of 50.00-110.00 Hz
(II) SIS(0): Clock range:  16.25 to 175.00 MHz
(WW) SIS(0): Default mode "800x600" deleted (hsync out of range)
(WW) SIS(0): Default mode "1024x768" deleted (hsync out of range)
(WW) SIS(0): Default mode "1024x768" deleted (hsync out of range)
(WW) SIS(0): Default mode "1024x768" deleted (hsync out of range)
(WW) SIS(0): Default mode "1152x864" deleted (hsync out of range)
(WW) SIS(0): Default mode "1280x960" deleted (hsync out of range)
(WW) SIS(0): Default mode "1280x960" deleted (hsync out of range)
(WW) SIS(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) SIS(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) SIS(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) SIS(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) SIS(0): Default mode "1600x1200" deleted (bad mode clock/interlace/doublescan)
(WW) SIS(0): Default mode "1600x1200" deleted (bad mode clock/interlace/doublescan)
(WW) SIS(0): Default mode "1600x1200" deleted (bad mode clock/interlace/doublescan)
(WW) SIS(0): Default mode "1600x1200" deleted (bad mode clock/interlace/doublescan)
(WW) SIS(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) SIS(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) SIS(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) SIS(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) SIS(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) SIS(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) SIS(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.0.2, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.3
Symbol drmSiSAgpInit from module /usr/X11R6/lib/modules/drivers/sis_drv.o is unresolved!
Symbol DRIQueryVersion from module /usr/X11R6/lib/modules/drivers/sis_drv.o is unresolved!
Symbol XAAFillSolidRects from module /usr/X11R6/lib/modules/drivers/sis_drv.o is unresolved!
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0xefef0000 - 0xefefffff (0x10000) MX[B]
	[1] 0	0xe7000000 - 0xe77fffff (0x800000) MX[B]
	[2] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0xe8000000 - 0xebffffff (0x4000000) MX[B]
	[8] -1	0xefee0000 - 0xefeeffff (0x10000) MX[B](B)
	[9] -1	0xefef0000 - 0xefefffff (0x10000) MX[B](B)
	[10] -1	0xe7000000 - 0xe77fffff (0x800000) MX[B](B)
	[11] 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[12] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[13] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[14] 0	0x0000cc80 - 0x0000ccff (0x80) IX[B]
	[15] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[16] -1	0x0000de00 - 0x0000de1f (0x20) IX[B]
	[17] -1	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[18] -1	0x0000cc80 - 0x0000ccff (0x80) IX[B](B)
	[19] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[20] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) SIS(0): Write-combining range (0xe7000000,0x800000)

Fatal server error:
AddScreen/ScreenInit failed for driver 0


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86 at xfree86.org.



More information about the blfs-support mailing list