[blfs-book] r10886 - in trunk/BOOK: . general/prog introduction/welcome xsoft/office

randy at linuxfromscratch.org randy at linuxfromscratch.org
Tue Dec 11 19:07:08 PST 2012


Author: randy
Date: 2012-12-11 20:06:58 -0700 (Tue, 11 Dec 2012)
New Revision: 10886

Modified:
   trunk/BOOK/general.ent
   trunk/BOOK/general/prog/perl-modules.xml
   trunk/BOOK/introduction/welcome/changelog.xml
   trunk/BOOK/xsoft/office/gnucash.xml
Log:
Updates to Perl Modules

Modified: trunk/BOOK/general/prog/perl-modules.xml
===================================================================
--- trunk/BOOK/general/prog/perl-modules.xml	2012-12-10 23:49:21 UTC (rev 10885)
+++ trunk/BOOK/general/prog/perl-modules.xml	2012-12-12 03:06:58 UTC (rev 10886)
@@ -29,13 +29,7 @@
     objects to the <application>Perl</application> language. Modules utilized
     by packages throughout BLFS are listed here, along with their dependencies.
     Installation of the modules shown on this page should be accomplished by
-    installing the listed dependencies (from the bottom and working up to the
-    top) and then the desired module. Most references to
-    <application>Perl</application> modules are in the form of Module,
-    Module::SubName or Module::Sub::Name, though sometimes you'll see Module,
-    Module-SubName or Module-Sub-Name. The references on this page that reflect
-    an external URL are in the latter form, as these are the official package
-    names.</para>
+    installing the dependencies in the order listed.</para>
 
     <itemizedlist spacing="compact">
       <listitem>
@@ -48,16 +42,6 @@
       </listitem>
     </itemizedlist>
 
-    <note>
-      <para>Some dependencies, such as the
-      <ulink url="http://search.cpan.org/~dwheeler/Test-Pod/">Test-Pod</ulink>
-      module, are used by several of the listed dependencies of the main
-      module and perhaps also the module being installed. Dependencies such as
-      this are only listed once in the dependency chain for each main module
-      (typically near the bottom-most dependency) to avoid redundancy and
-      additional clutter in the instructions.</para>
-    </note>
-
     <!-- Archive::Zip -->
     <bridgehead renderas="sect3" id="perl-archive-zip"
     xreflabel="Archive::Zip-&Archive-Zip-version;">
@@ -70,15 +54,80 @@
     <para>The Archive::Zip module allows a <application>Perl</application>
     program to create, manipulate, read, and write Zip archive files.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://www.cpan.org/authors/id/A/AD/ADAMK/Archive-Zip-&Archive-Zip-version;.tar.gz">
-        Archive::Zip-&Archive-Zip-version;</ulink>
-        (uses the standard <xref linkend="perl-standard-install"/>)</para>
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/A/AD/ADAMK/Archive-Zip-&Archive-Zip-version;.tar.gz">
+          Archive::Zip-&Archive-Zip-version;</ulink>
+          (uses the standard <xref linkend="perl-standard-install"/>)
+        </para>
       </listitem>
     </itemizedlist>
 
+    <!-- Crypt::SSLeay -->
+    <bridgehead renderas="sect3" id="perl-crypt-ssleay"
+    xreflabel="Crypt::SSLeay-&Crypt-SSLeay-version;">
+    Crypt::SSLeay-&Crypt-SSLeay-version;</bridgehead>
+
+    <indexterm zone="perl-modules perl-crypt-ssleay">
+      <primary sortas="g-Crypt-SSLeay">Crypt::SSLeay</primary>
+    </indexterm>
+
+    <para>The Crypt::SSLeay module provides support for the HTTPS protocol under
+    LWP, to allow an LWP::UserAgent object to perform GET, HEAD and POST
+    requests. This module and the dependency modules use the standard
+    <xref linkend="perl-standard-install"/>.</para>
+
+    <itemizedlist>
+      <listitem>
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/N/NA/NANIS/Crypt-SSLeay-&Crypt-SSLeay-version;.tar.gz">
+          Crypt::SSLeay-&Crypt-SSLeay-version;</ulink>
+        </para>
+        <itemizedlist>
+          <listitem>
+            <para>
+              <xref linkend="openssl"/>
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/LWP-Protocol-https/">LWP::Protocol::https</ulink>
+            </para>
+            <itemizedlist>
+              <listitem>
+                <para>
+                  <xref linkend="perl-lwp"/>
+                </para>
+              </listitem>
+              <listitem>
+                <para>
+                  <ulink url="http://search.cpan.org/~behroozi/IO-Socket-SSL/">IO::Socket::SSL</ulink>
+                </para>
+                <itemizedlist>
+                  <listitem>
+                    <para>
+                      <ulink url="http://search.cpan.org/dist/Net-SSLeay/">Net::SSLeay</ulink>
+                    </para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
+              <listitem>
+                <para>
+                  <ulink url="http://search.cpan.org/~abh/Mozilla-CA/">Mozilla::CA</ulink>
+                </para>
+              </listitem>
+            </itemizedlist>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~doy/Try-Tiny/">Try::Tiny</ulink>
+            </para>
+          </listitem>
+        </itemizedlist>
+      </listitem>
+    </itemizedlist>
+
     <!-- Date::Manip -->
     <bridgehead renderas="sect3" id="perl-date-manip"
     xreflabel="Date::Manip-&Date-Manip-version;">
@@ -93,18 +142,27 @@
     calculating a time a given amount of time from another, or parsing
     international times are all easily done. From the very beginning, the
     main focus of Date::Manip has been to be able to do ANY desired date/time
-    operation easily.</para>
+    operation easily. This module and the dependency module use the standard
+    <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/S/SB/SBECK/Date-Manip-&Date-Manip-version;.tar.gz">
-        Date::Manip-&Date-Manip-version;</ulink>
-        (uses the standard <xref linkend="perl-standard-install"/>)</para>
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/S/SB/SBECK/Date-Manip-&Date-Manip-version;.tar.gz">
+          Date::Manip-&Date-Manip-version;</ulink>
+        </para>
+        <itemizedlist>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~sbeck/Test-Inter/">Test::Inter</ulink>
+              (optionally used for the tests)
+            </para>
+          </listitem>
+        </itemizedlist>
       </listitem>
     </itemizedlist>
 
-    <!-- ExtUtils::Depends -->
+    <!-- ExtUtils::Depends
     <bridgehead renderas="sect3" id="perl-extutils-depends"
     xreflabel="ExtUtils::Depends-&ExtUtils-Depends-version;">
     ExtUtils::Depends-&ExtUtils-Depends-version;</bridgehead>
@@ -120,21 +178,21 @@
       and an XS interface besides the perl one.
     </para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
         <para>
           <ulink url="http://www.cpan.org/authors/id/F/FL/FLORA/ExtUtils-Depends-&ExtUtils-Depends-version;.tar.gz">
           ExtUtils::Depends-&ExtUtils-Depends-version;</ulink>
           (uses the standard <xref linkend="perl-standard-install"/>)</para>
       </listitem>
-    </itemizedlist>
+    </itemizedlist> -->
 
-    <!-- ExtUtils::PkgConfig -->
+    <!-- ExtUtils::PkgConfig
     <bridgehead renderas="sect3" id="perl-extutils-pkgconfig"
     xreflabel="ExtUtils::PkgConfig-&ExtUtils-PkgConfig-version;">
     ExtUtils::PkgConfig-&ExtUtils-PkgConfig-version;</bridgehead>
 
-    <indexterm zone="perl-modules perl-extutils-depends">
+    <indexterm zone="perl-modules perl-extutils-pkgconfig">
       <primary sortas="g-ExtUtils-PkgConfig">ExtUtils::PkgConfig</primary>
     </indexterm>
 
@@ -145,7 +203,7 @@
       knows.
     </para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
         <para>
           <ulink url="http://www.cpan.org/authors/id/X/XA/XAOC/ExtUtils-PkgConfig-&ExtUtils-PkgConfig-version;.tar.gz">
@@ -154,11 +212,13 @@
         </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-extutils-depends"/></para>
+            <para>
+              <xref linkend="perl-extutils-depends"/>
+            </para>
           </listitem>
         </itemizedlist>
       </listitem>
-    </itemizedlist>
+    </itemizedlist> -->
 
     <!-- Finance::Quote -->
     <bridgehead renderas="sect3" id="perl-finance-quote"
@@ -182,9 +242,8 @@
     <command>perldoc Finance::Quote</command> for full information.
     Alternatively, you can issue <command>perldoc lib/Finance/Quote.pm</command>
     after unpacking the distribution tarball and changing into the top-level
-    directory. The module and dependencies are installed using the
-    standard <application>Perl</application> module
-    <xref linkend="perl-standard-install"/>.</para>
+    directory. This module and the dependency modules are installed using the
+    standard <xref linkend="perl-standard-install"/>.</para>
 
     <note>
       <para>To run the regression test suite, you'll need a working Internet
@@ -199,21 +258,29 @@
       <filename>INSTALL</filename> file for full details.</para>
     </note>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://search.cpan.org/CPAN/authors/id/E/EC/ECOCODE/Finance-Quote-&Finance-Quote-version;.tar.gz">
-        Finance::Quote-&Finance-Quote-version;</ulink></para>
-
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/E/EC/ECOCODE/Finance-Quote-&Finance-Quote-version;.tar.gz">
+          Finance::Quote-&Finance-Quote-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-html-tableextract"/></para>
+            <para>
+              <xref linkend="perl-lwp"/>
+            </para>
           </listitem>
           <listitem>
-            <para><xref linkend="perl-lwp"/></para>
+            <para>
+              <xref linkend="perl-crypt-ssleay"/>
+            </para>
           </listitem>
+          <listitem>
+            <para>
+              <xref linkend="perl-html-tableextract"/>
+            </para>
+          </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
 
@@ -231,40 +298,41 @@
     installed using the standard <application>Perl</application> module
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/M/MS/MSISK/Finance-QuoteHist-&Finance-QuoteHist-version;.tar.gz">
-        Finance-QuoteHist-&Finance-QuoteHist-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/M/MS/MSISK/Finance-QuoteHist-&Finance-QuoteHist-version;.tar.gz">
+          Finance-QuoteHist-&Finance-QuoteHist-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-html-tableextract"/></para>
+            <para>
+              <xref linkend="perl-html-tableextract"/>
+            </para>
           </listitem>
           <listitem>
-            <para><xref linkend="perl-lwp"/></para>
+            <para>
+              <xref linkend="perl-lwp"/>
+            </para>
           </listitem>
           <listitem>
-            <para><xref linkend="perl-date-manip"/></para>
+            <para>
+              <xref linkend="perl-date-manip"/>
+            </para>
           </listitem>
           <listitem>
-            <para id="perl-text-csv"><ulink
-            url="http://cpan.org/authors/id/M/MA/MAKAMAKA/Text-CSV-&Text-CSV-version;.tar.gz">
-            Text-CSV-&Text-CSV-version;</ulink></para>
-            <indexterm zone="perl-modules perl-text-csv">
-              <primary sortas="g-Text-CSV">Text::CSV</primary>
-            </indexterm>
+            <para>
+              <ulink url="http://cpan.org/authors/id/M/MA/MAKAMAKA/Text-CSV-&Text-CSV-version;.tar.gz">
+              Text-CSV-&Text-CSV-version;</ulink>
+            </para>
           </listitem>
           <listitem>
-            <para id="perl-text-csv_xs"><ulink
-            url="http://cpan.org/authors/id/H/HM/HMBRAND/Text-CSV_XS-&Text-CSV_XS-version;.tgz">
-            Text-CSV_XS-&Text-CSV_XS-version; (optional)</ulink></para>
-            <indexterm zone="perl-modules perl-text-csv_xs">
-              <primary sortas="g-Text-CSV_XS">Text::CSV_XS</primary>
-            </indexterm>
+            <para>
+              <ulink url="http://cpan.org/authors/id/H/HM/HMBRAND/Text-CSV_XS-&Text-CSV_XS-version;.tgz">
+              Text-CSV_XS-&Text-CSV_XS-version; (optional)</ulink>
+            </para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
     -->
@@ -274,28 +342,37 @@
     xreflabel="Glib-&Glib-perl-version;">
     Glib-&Glib-perl-version;</bridgehead>
 
-    <indexterm zone="perl-modules perl-extutils-depends">
+    <indexterm zone="perl-modules perl-glib">
       <primary sortas="g-Glib">Glib</primary>
     </indexterm>
 
     <para>
       This module is a <application>Perl</application> wrapper around
-      <application>Glib</application> that attempts to provide a perlish
+      <application>GLib</application> that attempts to provide a perlish
       interface while remaining as true as possible to the underlying C API, so
       that any reference materials you can find on using GLib may still apply to
-      using the libraries from perl.
+      using the libraries from Perl. This module and the dependency modules use
+      the standard <xref linkend="perl-standard-install"/>.
     </para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
         <para>
           <ulink url="http://www.cpan.org/authors/id/T/TS/TSCH/Glib-&Glib-perl-version;.tar.gz">
           Glib-&Glib-perl-version;</ulink>
-          (uses the standard <xref linkend="perl-standard-install"/>) Requires:
         </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-extutils-pkgconfig"/></para>
+            <para>
+              <ulink url="http://search.cpan.org/~xaoc/ExtUtils-PkgConfig/">ExtUtils::PkgConfig</ulink>
+            </para>
+            <itemizedlist>
+              <listitem>
+                <para>
+                  <ulink url="http://search.cpan.org/~flora/ExtUtils-Depends/">ExtUtils::Depends</ulink>
+                </para>
+              </listitem>
+            </itemizedlist>
           </listitem>
         </itemizedlist>
       </listitem>
@@ -311,39 +388,30 @@
     </indexterm>
 
     <para>The HTML::Parser distribution is a collection of modules that parse
-    and extract information from HTML documents. The modules listed below are
-    installed using the standard <application>Perl</application> module
+    and extract information from HTML documents. This module and the dependency
+    modules use the standard
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/G/GA/GAAS/HTML-Parser-&HTML-Parser-version;.tar.gz">
-        HTML::Parser-&HTML-Parser-version;</ulink></para>
-
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/G/GA/GAAS/HTML-Parser-&HTML-Parser-version;.tar.gz">
+          HTML::Parser-&HTML-Parser-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para id="perl-html-tagset"><ulink
-            url="http://search.cpan.org/~petdance/HTML-Tagset/">
-            HTML-Tagset</ulink></para>
-            <indexterm zone="perl-modules perl-html-tagset">
-              <primary sortas="g-HTML-Tagset">HTML::Tagset</primary>
-            </indexterm>
-
-            <itemizedlist>
-              <listitem>
-                <para><ulink url="http://search.cpan.org/~dwheeler/Test-Pod/">
-                Test-Pod</ulink> (optionally used during the tests)</para>
-              </listitem>
-            </itemizedlist>
-
+            <para>
+              <ulink url="http://search.cpan.org/~petdance/HTML-Tagset/">HTML::Tagset</ulink>
+            </para>
           </listitem>
           <listitem>
-            <para><xref linkend="perl-lwp"/> (run-time requirement for the
-            included HTML::HeadParser module)</para>
+            <para>
+              <xref linkend="perl-lwp"/> (circular; howevever, it can
+              be installed after HTML::Parser as it is only a run-time
+              requirement for the included HTML::HeadParser module)
+            </para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
 
@@ -359,55 +427,49 @@
     <para>HTML::TableExtract is a module that simplifies the extraction of the
     content contained in tables within HTML documents, extracted either as
     text or encoded element trees. Tables of note may be specified using
-    Headers, Depth, Count, Attributes, or some combination of the four. The
-    module and dependencies are installed using the standard
-    <application>Perl</application> module
+    Headers, Depth, Count, Attributes, or some combination of the four. This
+    module and dependency modules use the standard
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/M/MS/MSISK/HTML-TableExtract-&HTML-TableExtract-version;.tar.gz">
-        HTML::TableExtract-&HTML-TableExtract-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/M/MS/MSISK/HTML-TableExtract-&HTML-TableExtract-version;.tar.gz">
+          HTML::TableExtract-&HTML-TableExtract-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para id="perl-html-element-extended"><ulink
-            url="http://search.cpan.org/~msisk/HTML-Element-Extended/">
-            HTML-Element-Extended</ulink></para>
-            <indexterm zone="perl-modules perl-html-element-extended">
-              <primary sortas="g-HTML-Element-Extended">HTML::Element::Extended</primary>
-            </indexterm>
-
+            <para>
+              <ulink url="http://search.cpan.org/~msisk/HTML-Element-Extended/">HTML::Element::Extended</ulink>
+            </para>
             <itemizedlist>
               <listitem>
-                <para id="perl-html-tree"><ulink
-                url="http://search.cpan.org/~jfearn/HTML-Tree/">
-                HTML-Tree</ulink></para>
-                <indexterm zone="perl-modules perl-html-tree">
-                  <primary sortas="g-HTML-Tree">HTML::Tree</primary>
-                </indexterm>
-
+                <para>
+                  <ulink url="http://search.cpan.org/~cjm/HTML-Tree/">HTML::Tree</ulink>
+                </para>
                 <itemizedlist>
                   <listitem>
-                    <para><xref linkend="perl-html-parser"/></para>
+                    <para>
+                      <xref linkend="perl-html-parser"/>
+                    </para>
                   </listitem>
                   <listitem>
-                    <para><ulink url="http://search.cpan.org/~dwheeler/Test-Pod/">
-                    Test-Pod</ulink> (optionally used during the tests)</para>
+                    <para>
+                      <ulink url="http://search.cpan.org/dist/Test-Fatal/">Test::Fatal</ulink>
+                    </para>
+                    <itemizedlist>
+                      <listitem>
+                        <para>
+                          <ulink url="http://search.cpan.org/~doy/Try-Tiny/">Try::Tiny</ulink>
+                        </para>
+                      </listitem>
+                    </itemizedlist>
                   </listitem>
                 </itemizedlist>
-
               </listitem>
             </itemizedlist>
-
           </listitem>
-          <listitem>
-            <para><ulink url="http://search.cpan.org/~petdance/Test-Pod-Coverage/">
-            Test-Pod-Coverage</ulink> (optionally used during the tests)</para>
-          </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
 
@@ -426,49 +488,132 @@
     main focus of the library is to provide classes and functions that allow
     you to write WWW clients. The library also contains modules that are of
     more general use and even classes that help you implement simple HTTP
-    servers. The LWP collection and all its <application>Perl</application>
-    module dependencies are installed using the standard
-    <application>Perl</application> module
-    <xref linkend="perl-standard-install"/>.</para>
+    servers. The LWP collection and all its dependency modules use the standard
+    <xref linkend="perl-standard-install"/>. The dependencies should be
+    installed in the order listed below. Ensure you install the dependency
+    chain for each module before installing the modules.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/G/GA/GAAS/libwww-perl-&LWP-version;.tar.gz">
-        libwww-perl-&LWP-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/G/GA/GAAS/libwww-perl-&LWP-version;.tar.gz">
+          libwww-perl-&LWP-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-uri"/></para>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/Encode-Locale/">Encode::Locale</ulink>
+            </para>
           </listitem>
           <listitem>
-            <para><xref linkend="perl-html-parser"/></para>
-          </listitem>
-          <listitem>
             <para>
-            <ulink url="http://search.cpan.org/~nanis/Crypt-SSLeay/">
-            Crypt-SSLeay</ulink> (optional, for HTTPS
-            support)</para>
-
+              <ulink url="http://search.cpan.org/~gaas/HTML-Form/">HTML::Form</ulink>
+            </para>
             <itemizedlist>
               <listitem>
-                <para><xref linkend="openssl"/></para>
+                <para>
+                  <xref linkend="perl-uri"/>
+                </para>
               </listitem>
               <listitem>
-                <para>A <quote>testcover</quote> <filename>Makefile</filename>
-                target is created (which creates a
-                <command>/usr/bin/testcover</command> script) if the <ulink
-                url="http://cpan.org/authors/id/S/SM/SMPETERS/ExtUtils-MakeMaker-Coverage-0.05.tar.gz">
-                Extutils-MakeMaker-Coverage</ulink> module is installed.</para>
+                <para>
+                  <xref linkend="perl-html-parser"/>
+                </para>
               </listitem>
+              <listitem>
+                <para>
+                  <ulink url="http://search.cpan.org/~gaas/HTTP-Message/">HTTP::Message</ulink>
+                </para>
+                <itemizedlist>
+                  <listitem>
+                    <para>
+                      <ulink url="http://search.cpan.org/~gaas/HTTP-Date/">HTTP::Date</ulink>
+                    </para>
+                  </listitem>
+                  <listitem>
+                    <para>
+                      <ulink url="http://search.cpan.org/~cjm/IO-HTML/">IO::HTML</ulink>
+                    </para>
+                  </listitem>
+                  <listitem>
+                    <para>
+                      <ulink url="http://search.cpan.org/~gaas/LWP-MediaTypes/">LWP::MediaTypes</ulink>
+                    </para>
+                  </listitem>
+                </itemizedlist>
+              </listitem>
             </itemizedlist>
-
           </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/HTTP-Cookies/">HTTP::Cookies</ulink>
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/HTTP-Negotiate/">HTTP::Negotiate</ulink>
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/Net-HTTP/">Net::HTTP</ulink>
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/WWW-RobotRules/">WWW::RobotRules</ulink>
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/HTTP-Daemon/">HTTP::Daemon</ulink>
+            </para>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/File-Listing/">File::Listing</ulink>
+            </para>
+          </listitem>
         </itemizedlist>
+      </listitem>
+    </itemizedlist>
 
+    <para>If you want the LWP installation to support the HTTPS protocol,
+    install the following modules:</para>
+
+    <itemizedlist>
+      <listitem>
+        <para>
+          <xref linkend="openssl"/>
+        </para>
       </listitem>
+      <listitem>
+        <para>
+          <ulink url="http://search.cpan.org/~gaas/LWP-Protocol-https/">LWP::Protocol::https</ulink>
+        </para>
+        <itemizedlist>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~behroozi/IO-Socket-SSL/">IO::Socket::SSL</ulink>
+            </para>
+            <itemizedlist>
+              <listitem>
+                <para>
+                  <ulink url="http://search.cpan.org/dist/Net-SSLeay/">Net::SSLeay</ulink>
+                </para>
+              </listitem>
+            </itemizedlist>
+          </listitem>
+          <listitem>
+            <para>
+              <ulink url="http://search.cpan.org/~abh/Mozilla-CA/">Mozilla::CA</ulink>
+            </para>
+          </listitem>
+        </itemizedlist>
+      </listitem>
     </itemizedlist>
 
+
     <!-- Module::Info
     <bridgehead renderas="sect3" id="perl-module-info"
     xreflabel="Module::Info-&Module-Info-version;">
@@ -488,23 +633,12 @@
     using the standard <application>Perl</application> module
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://www.cpan.org/authors/id/M/MB/MBARBON/Module-Info-&Module-Info-version;.tar.gz">
-        Module-Info-&Module-Info-version;</ulink></para>
-
-        <itemizedlist>
-          <listitem>
-            <para><xref linkend="perl-test-pod-coverage"/>
-            (optionally used during the tests)</para>
-          </listitem>
-          <listitem>
-            <para><xref linkend="perl-test-pod"/>
-            (optionally used during the tests)</para>
-          </listitem>
-        </itemizedlist>
-
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/M/MB/MBARBON/Module-Info-&Module-Info-version;.tar.gz">
+          Module-Info-&Module-Info-version;</ulink>
+        </para>
       </listitem>
     </itemizedlist>
     -->
@@ -531,42 +665,47 @@
     installed using the standard <application>Perl</application>
     module <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/A/AU/AUDREYT/Module-Signature-&Module-Signature-version;.tar.gz">
-        Module-Signature-&Module-Signature-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/A/AU/AUDREYT/Module-Signature-&Module-Signature-version;.tar.gz">
+          Module-Signature-&Module-Signature-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-text-diff"/></para>
+            <para>
+              <xref linkend="perl-text-diff"/>
+            </para>
           </listitem>
           <listitem>
-            <para id="perl-par-dist"><ulink
-            url="http://cpan.org/authors/id/S/SM/SMUELLER/PAR-Dist-&PAR-Dist-version;.tar.gz">
-            PAR-Dist-&PAR-Dist-version;</ulink></para>
-            <indexterm zone="perl-modules perl-par-dist">
-              <primary sortas="g-PAR-Dist">PAR::Dist</primary>
-            </indexterm>
-
+            <para>
+              <ulink url="http://cpan.org/authors/id/S/SM/SMUELLER/PAR-Dist-&PAR-Dist-version;.tar.gz">
+              PAR-Dist-&PAR-Dist-version;</ulink>
+            </para>
             <itemizedlist>
               <listitem>
-                <para><xref linkend="perl-archive-zip"/></para>
+                <para>
+                  <xref linkend="perl-archive-zip"/>
+                </para>
               </listitem>
               <listitem>
-                <para><xref linkend="perl-lwp"/></para>
+                <para>
+                  <xref linkend="perl-lwp"/>
+                </para>
               </listitem>
               <listitem>
-                <para><xref linkend="perl-module-signature"/></para>
+                <para>
+                  <xref linkend="perl-module-signature"/>
+                </para>
               </listitem>
             </itemizedlist>
           </listitem>
-
           <listitem>
-            <para><xref linkend="gnupg"/></para>
+            <para>
+            <xref linkend="gnupg"/>
+            </para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
     -->
@@ -584,132 +723,37 @@
     <application>Perl</application>. It can be used to perform nearly any type
     of DNS query from a <application>Perl</application> script. The Net::DNS
     module and all its dependencies are installed using the standard
-    <application>Perl</application> module
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/O/OL/OLAF/Net-DNS-&Net-DNS-version;.tar.gz">
-        Net::DNS-&Net-DNS-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/O/OL/OLAF/Net-DNS-&Net-DNS-version;.tar.gz">
+          Net::DNS-&Net-DNS-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para id="perl-digest-hmac"><ulink
-            url="http://search.cpan.org/~gaas/Digest-HMAC/">
-            Digest-HMAC</ulink></para>
-            <indexterm zone="perl-modules perl-digest-hmac">
-              <primary sortas="g-Digest-HMAC">Digest::HMAC</primary>
-            </indexterm>
-
-            <itemizedlist>
-              <listitem>
-                <para id="perl-digest-sha1"><ulink
-                url="http://search.cpan.org/~mshelor/Digest-SHA/">
-                Digest-SHA</ulink></para>
-                <indexterm zone="perl-modules perl-digest-sha1">
-                  <primary sortas="g-Digest-SHA1">Digest::SHA1</primary>
-                </indexterm>
-              </listitem>
-            </itemizedlist>
-
+            <para>
+              <ulink url="http://search.cpan.org/~gaas/Digest-HMAC/">Digest::HMAC</ulink>
+            </para>
           </listitem>
           <listitem>
-            <para id="perl-net-ip"><ulink
-            url="http://search.cpan.org/~manu/Net-IP/">
-            Net-IP</ulink></para>
-            <indexterm zone="perl-modules perl-net-ip">
-              <primary sortas="g-Net-IP">Net::IP</primary>
-            </indexterm>
-          </listitem>
-          <listitem>
-            <para id="perl-io-socket-inet6"><ulink
-            url="http://search.cpan.org/~gbarr/IO/lib/IO/Socket/INET.pm">
-            IO-Socket-INET</ulink> (required for
-            IPv6 support)</para>
-            <indexterm zone="perl-modules perl-io-socket-inet6">
-              <primary sortas="g-IO-Socket-INET6">IO::Socket::INET6</primary>
-            </indexterm>
-
+            <para>
+              <ulink url="http://search.cpan.org/~gbarr/IO/lib/IO/Socket/INET.pm">IO::Socket::INET</ulink>
+              (required for IPv6 support)
+            </para>
             <itemizedlist>
               <listitem>
-                <para id="perl-socket6"><ulink
-                url="http://search.cpan.org/~umemoto/Socket6/">
-                Socket6</ulink></para>
-                <indexterm zone="perl-modules perl-socket6">
-                  <primary sortas="g-Socket6">Socket6</primary>
-                </indexterm>
+                <para>
+                  <ulink url="http://search.cpan.org/~umemoto/Socket6/">Socket6</ulink>
+                </para>
               </listitem>
             </itemizedlist>
-
           </listitem>
-          <listitem>
-            <para id="perl-digest-bubblebabble"><ulink
-            url="http://search.cpan.org/~btrott/Digest-BubbleBabble/">
-            Digest-BubbleBabble</ulink></para>
-            <indexterm zone="perl-modules perl-digest-bubblebabble">
-              <primary sortas="g-Digest-BubbleBabble">Digest::BubbleBabble</primary>
-            </indexterm>
-          </listitem>
-          <listitem>
-            <para><ulink url="http://search.cpan.org/~dwheeler/Test-Pod/">
-            Test-Pod</ulink> (optionally used during the tests)</para>
-          </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
 
-
-    <!-- Pod::Coverage
-    <bridgehead renderas="sect3" id="perl-pod-coverage"
-    xreflabel="Pod::Coverage-&Pod-Coverage-version;">
-    Pod::Coverage-&Pod-Coverage-version;</bridgehead>
-
-    <indexterm zone="perl-modules perl-pod-coverage">
-      <primary sortas="g-Pod-Coverage">Pod::Coverage</primary>
-    </indexterm>
-
-    <para>The Pod::Coverage module is a <application>Perl</application> library
-    used to check if the documentation of a module is comprehensive. All the
-    dependencies are installed using the standard
-    <application>Perl</application> module
-    <xref linkend="perl-standard-install"/>.</para>
-
-    <itemizedlist spacing='compact'>
-      <listitem>
-        <para><ulink
-        url="http://www.cpan.org/authors/id/R/RC/RCLAMP/Pod-Coverage-&Pod-Coverage-version;.tar.gz">
-        Pod-Coverage-&Pod-Coverage-version;</ulink></para>
-
-        <itemizedlist>
-          <listitem>
-            <para id="perl-devel-symdump"><ulink
-            url="http://www.cpan.org/authors/id/A/AN/ANDK/Devel-Symdump-&Devel-Symdump-version;.tar.gz">
-            Devel-Symdump-&Devel-Symdump-version;</ulink></para>
-            <indexterm zone="perl-modules perl-devel-symdump">
-              <primary sortas="g-Devel-Symdump">Devel::Symdump</primary>
-            </indexterm>
-
-            <itemizedlist>
-              <listitem>
-                <para><xref linkend="perl-test-pod-coverage"/>
-                (optionally used during the tests, and is a circular
-                dependency)</para>
-              </listitem>
-              <listitem>
-                <para><xref linkend="perl-test-pod"/>
-                (optionally used during the tests)</para>
-              </listitem>
-            </itemizedlist>
-
-          </listitem>
-        </itemizedlist>
-
-      </listitem>
-    </itemizedlist>
-    -->
-
     <!-- SGMLSpm -->
     <bridgehead renderas="sect3" id="perl-sgmlspm"
     xreflabel="SGMLSpm-&SGMLSpm-version;">
@@ -721,77 +765,18 @@
 
     <para>The SGMLSpm module is a <application>Perl</application> library
     used for parsing the output from James Clark's SGMLS and NSGMLS
-    parsers. The module is installed using the standard
-    <application>Perl</application> module
-    <xref linkend="perl-standard-install"/>.</para>
+    parsers.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://search.cpan.org/CPAN/authors/id/R/RA/RAAB/SGMLSpm-&SGMLSpm-version;.tar.gz">
-        SGMLSpm-&SGMLSpm-version;</ulink></para>
+        <para>
+          <ulink url="http://search.cpan.org/CPAN/authors/id/R/RA/RAAB/SGMLSpm-&SGMLSpm-version;.tar.gz">
+          SGMLSpm-&SGMLSpm-version;</ulink>
+          ( uses the standard <xref linkend="perl-standard-install"/>)
+        </para>
       </listitem>
     </itemizedlist>
 
-    <!-- Test::Pod
-    <bridgehead renderas="sect3" id="perl-test-pod"
-    xreflabel="Test::Pod-&Test-Pod-version;">
-    Test::Pod-&Test-Pod-version;</bridgehead>
-
-    <indexterm zone="perl-modules perl-test-pod">
-      <primary sortas="g-Test-Pod">Test::Pod</primary>
-    </indexterm>
-
-    <para>The Test:Pod module is (most of the time, optionally) used by other
-    modules during the build process to check the validity of POD (Plain Old
-    Documentation) files. The Test::Pod module is typically included by module
-    authors to automatically find and check all POD files in a module
-    distribution. This module is installed using the standard
-    <application>Perl</application> module
-    <xref linkend="perl-standard-install"/>.</para>
-
-    <itemizedlist spacing='compact'>
-      <listitem>
-        <para><ulink
-        url="http://www.cpan.org/authors/id/D/DW/DWHEELER/Test-Pod-&Test-Pod-version;.tar.gz">
-        Test-Pod-&Test-Pod-version;</ulink></para>
-      </listitem>
-    </itemizedlist>
-    -->
-
-    <!-- Test::Pod::Coverage
-    <bridgehead renderas="sect3" id="perl-test-pod-coverage"
-    xreflabel="Test::Pod::Coverage-&Test-Pod-Coverage-version;">
-    Test::Pod::Coverage-&Test-Pod-Coverage-version;</bridgehead>
-
-    <indexterm zone="perl-modules perl-test-pod-coverage">
-      <primary sortas="g-Test-Pod-Coverage">Test::Pod::Coverage</primary>
-    </indexterm>
-
-    <para>The Test::Pod::Coverage module is used to check files in a
-    distribution for POD coverage. It is normally used by developers to
-    ensure their projects are adequately covered with POD and it is also used
-    in the test suites of many module distributions. This module and the
-    dependency are installed using the standard
-    <application>Perl</application> module
-    <xref linkend="perl-standard-install"/>.</para>
-
-    <itemizedlist spacing='compact'>
-      <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/P/PE/PETDANCE/Test-Pod-Coverage-&Test-Pod-Coverage-version;.tar.gz">
-        Test-Pod-Coverage-&Test-Pod-Coverage-version;</ulink></para>
-
-        <itemizedlist>
-          <listitem>
-            <para><xref linkend="perl-pod-coverage"/></para>
-          </listitem>
-        </itemizedlist>
-
-      </listitem>
-    </itemizedlist>
-    -->
-
     <!-- Text::Diff
     <bridgehead renderas="sect3" id="perl-text-diff"
     xreflabel="Text::Diff-&Text-Diff-version;">
@@ -812,23 +797,18 @@
     <application>Perl</application> module
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/R/RB/RBS/Text-Diff-&Text-Diff-version;.tar.gz">
-        Text-Diff-&Text-Diff-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/R/RB/RBS/Text-Diff-&Text-Diff-version;.tar.gz">
+          Text-Diff-&Text-Diff-version;</ulink></para>
         <itemizedlist>
           <listitem>
-            <para id="perl-algorithm-diff"><ulink
-            url="http://cpan.org/authors/id/T/TY/TYEMQ/Algorithm-Diff-&Algorithm-Diff-version;.tar.gz">
-            Algorithm-Diff-&Algorithm-Diff-version;</ulink></para>
-            <indexterm zone="perl-modules perl-algorithm-diff">
-              <primary sortas="g-Algorithm-Diff">Algorithm::Diff</primary>
-            </indexterm>
+            <para>
+              <ulink url="http://cpan.org/authors/id/T/TY/TYEMQ/Algorithm-Diff-&Algorithm-Diff-version;.tar.gz">
+              Algorithm-Diff-&Algorithm-Diff-version;</ulink></para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
     -->
@@ -852,18 +832,18 @@
     <application>Perl</application> module
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://www.cpan.org/authors/id/S/SR/SREZIC/Tk-&Tk-Perl-version;.tar.gz">
-        Tk-&Tk-Perl-version;</ulink></para>
-
+        <para>
+          <ulink url="http://www.cpan.org/authors/id/S/SR/SREZIC/Tk-&Tk-Perl-version;.tar.gz">
+          Tk-&Tk-Perl-version;</ulink></para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="tk"/> and <xref linkend="libjpeg"/></para>
+            <para>
+              <xref linkend="tk"/> and <xref linkend="libjpeg"/>
+            </para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
     -->
@@ -889,7 +869,7 @@
       fragment identifier.
     </para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
         <para>
           <ulink url="http://www.cpan.org/authors/id/G/GA/GAAS/URI-&URI-version;.tar.gz">
@@ -913,21 +893,22 @@
     standard <application>Perl</application> module
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://search.cpan.org/CPAN/authors/id/T/TO/TODDR/XML-Parser-&XML-Parser-version;.tar.gz">
-        XML::Parser-&XML-Parser-version;</ulink></para>
-
+        <para>
+          <ulink url="http://search.cpan.org/CPAN/authors/id/T/TO/TODDR/XML-Parser-&XML-Parser-version;.tar.gz">
+          XML::Parser-&XML-Parser-version;</ulink>
+        </para>
         <itemizedlist>
           <listitem>
-            <para><xref linkend="expat"/></para>
+            <para>
+              <xref linkend="expat"/>
+            </para>
           </listitem>
-        </itemizedlist>
-        <itemizedlist>
           <listitem>
-            <para><xref linkend="perl-lwp"/>
-            (optionally used during the tests)</para>
+            <para>
+              <xref linkend="perl-lwp"/> (optionally used during the tests)
+            </para>
           </listitem>
         </itemizedlist>
 
@@ -945,78 +926,57 @@
 
     <para>The XML::Simple module is a <application>Perl</application> extension
     that provides an easy API to read and write XML (especially config files).
-    The module and all dependencies are installed using the standard
-    <application>Perl</application> module
+    This module and all dependency modules use the standard
     <xref linkend="perl-standard-install"/>.</para>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/G/GR/GRANTM/XML-Simple-&XML-Simple-version;.tar.gz">
-        XML::Simple-&XML-Simple-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/G/GR/GRANTM/XML-Simple-&XML-Simple-version;.tar.gz">
+          XML::Simple-&XML-Simple-version;</ulink></para>
         <itemizedlist>
           <listitem>
             <para>One of the following four modules must be installed:</para>
-
             <itemizedlist>
               <listitem>
-                <para id="perl-xml-sax"><ulink
-                url="http://search.cpan.org/~grantm/XML-SAX/">
-                XML-SAX</ulink></para>
-                <indexterm zone="perl-modules perl-xml-sax">
-                  <primary sortas="g-XML-SAX">XML::SAX</primary>
-                </indexterm>
-
+                <para>
+                  <ulink url="http://search.cpan.org/~grantm/XML-SAX/">XML-SAX</ulink>
+                </para>
                 <itemizedlist>
                   <listitem>
-                    <para id="perl-xml-namespacesupport"><ulink
-                    url="http://search.cpan.org/~perigrin/XML-NamespaceSupport/">
-                    XML-NamespaceSupport</ulink></para>
-                    <indexterm zone="perl-modules perl-xml-namespacesupport">
-                      <primary sortas="g-XML-NamespaceSupport">XML::NamespaceSupport</primary>
-                    </indexterm>
+                    <para>
+                      <ulink url="http://search.cpan.org/~perigrin/XML-NamespaceSupport/">
+                      XML-NamespaceSupport</ulink>
+                    </para>
                   </listitem>
                 </itemizedlist>
-
               </listitem>
               <listitem>
-                <para id="perl-xml-sax-expat"><ulink
-                url="http://search.cpan.org/~bjoern/XML-SAX-Expat/">
-                XML-SAX-Expat</ulink></para>
-                <indexterm zone="perl-modules perl-xml-sax-expat">
-                  <primary sortas="g-XML-SAX-Expat">XML::SAX::Expat</primary>
-                </indexterm>
+                <para>
+                  <ulink url="http://search.cpan.org/~bjoern/XML-SAX-Expat/">XML-SAX-Expat</ulink>
+                </para>
               </listitem>
               <listitem>
-                <para id="perl-xml-libxml"><ulink
-                url="http://search.cpan.org/~shlomif/XML-LibXML/">
-                XML-LibXML</ulink></para>
-                <indexterm zone="perl-modules perl-xml-libxml">
-                  <primary sortas="g-XML-LibXML">XML::LibXML</primary>
-                </indexterm>
+                <para id="perl-xml-libxml">
+                  <ulink url="http://search.cpan.org/~shlomif/XML-LibXML/">XML-LibXML</ulink>
+                </para>
               </listitem>
               <listitem>
-                <para><xref linkend="perl-xml-parser"/></para>
+                <para>
+                  <xref linkend="perl-xml-parser"/>
+                </para>
               </listitem>
             </itemizedlist>
-
           </listitem>
           <listitem>
-            <para id="perl-tie-ixhash"><ulink
-            url="http://search.cpan.org/~chorny/Tie-IxHash/">
-            Tie-IxHash</ulink></para>
-            <indexterm zone="perl-modules perl-tie-ixhash">
-              <primary sortas="g-Tie-IxHash">Tie::IxHash</primary>
-            </indexterm>
+            <para>
+              <ulink url="http://search.cpan.org/~chorny/Tie-IxHash/">Tie-IxHash</ulink>
+            </para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
 
-
-
     <!-- YAML
     <bridgehead renderas="sect3" id="perl-yaml"
     xreflabel="YAML-&YAML-version;">
@@ -1059,45 +1019,37 @@
 
     </note>
 
-    <itemizedlist spacing='compact'>
+    <itemizedlist>
       <listitem>
-        <para><ulink
-        url="http://cpan.org/authors/id/I/IN/INGY/YAML-&YAML-version;.tar.gz">
-        YAML-&YAML-version;</ulink></para>
-
+        <para>
+          <ulink url="http://cpan.org/authors/id/I/IN/INGY/YAML-&YAML-version;.tar.gz">
+          YAML-&YAML-version;</ulink></para>
         <itemizedlist>
           <listitem>
-            <para id="perl-test-base"><ulink
-            url="http://cpan.org/authors/id/I/IN/INGY/Test-Base-&Test-Base-version;.tar.gz">
-            Test-Base-&Test-Base-version;</ulink>
-            (optionally used during the tests)</para>
-            <indexterm zone="perl-modules perl-test-base">
-              <primary sortas="g-Test-Base">Test::Base</primary>
-            </indexterm>
-
-            <itemizedlist>
-              <listitem>
-                <para id="perl-spiffy"><ulink
-                url="http://cpan.org/authors/id/I/IN/INGY/Spiffy-&Spiffy-version;.tar.gz">
-                Spiffy-&Spiffy-version;</ulink></para>
-                <indexterm zone="perl-modules perl-spiffy">
-                  <primary sortas="g-Spiffy">Spiffy</primary>
-                </indexterm>
-              </listitem>
-            </itemizedlist>
-
+            <para>
+              <ulink url="http://cpan.org/authors/id/I/IN/INGY/Test-Base-&Test-Base-version;.tar.gz">
+              Test-Base-&Test-Base-version;</ulink>
+              (optionally used during the tests)
+           </para>
+             <itemizedlist>
+               <listitem>
+                <para
+                  <ulink url="http://cpan.org/authors/id/I/IN/INGY/Spiffy-&Spiffy-version;.tar.gz">
+                  Spiffy-&Spiffy-version;</ulink></para>
+               </listitem>
+             </itemizedlist>
           </listitem>
           <listitem>
-            <para><xref linkend="perl-text-diff"/>
-            (optionally used during the tests)</para>
+            <para>
+              <xref linkend="perl-text-diff"/>
+              (optionally used during the tests)
+            </para>
           </listitem>
         </itemizedlist>
-
       </listitem>
     </itemizedlist>
     -->
 
-
   </sect2>
 
   <sect2 role="installation" id="perl-standard-install"
@@ -1116,7 +1068,6 @@
 <screen role="root"><userinput>make install</userinput></screen>
 
     <note>
-
       <para>When reinstalling a <application>Perl</application> module,
       sometimes older versions of the module being reinstalled are in other
       directories specified in <parameter>@INC</parameter>.  To delete all

Modified: trunk/BOOK/general.ent
===================================================================
--- trunk/BOOK/general.ent	2012-12-10 23:49:21 UTC (rev 10885)
+++ trunk/BOOK/general.ent	2012-12-12 03:06:58 UTC (rev 10886)
@@ -3,13 +3,13 @@
 $Date$
 -->
 
-<!ENTITY day          "11">                   <!-- Always 2 digits -->
+<!ENTITY day          "12">                   <!-- Always 2 digits -->
 <!ENTITY month        "12">                   <!-- Always 2 digits -->
 <!ENTITY year         "2012">
 <!ENTITY copyrightdate "2001-&year;">
 <!ENTITY copyholder   "The BLFS Development Team">
 <!ENTITY version      "&year;-&month;-&day;">
-<!ENTITY releasedate  "December 11th, &year;">
+<!ENTITY releasedate  "December 12th, &year;">
 <!ENTITY pubdate      "&year;-&month;-&day;"> <!-- metadata req. by TLDP -->
 <!ENTITY blfs-version "svn">                  <!-- svn|[release #] -->
 <!ENTITY lfs-version  "development">          <!-- version|testing|unstable|development] -->
@@ -421,16 +421,16 @@
 
 <!-- Perl module versions used in the Perl Modules instructions -->
 <!ENTITY Archive-Zip-version          "1.30">
-<!ENTITY Crypt-SSLeay-version         "0.58">
-<!ENTITY Date-Manip-version           "6.31">
+<!ENTITY Crypt-SSLeay-version         "0.64">
+<!ENTITY Date-Manip-version           "6.37">
 <!ENTITY ExtUtils-Depends-version     "0.304">
 <!ENTITY ExtUtils-PkgConfig-version   "1.13">
-<!ENTITY Finance-Quote-version        "1.17">
-<!ENTITY Glib-perl-version            "1.262">
+<!ENTITY Finance-Quote-version        "1.18">
+<!ENTITY Glib-perl-version            "1.280">
 <!ENTITY HTML-Parser-version          "3.69">
 <!ENTITY HTML-TableExtract-version    "2.11">
 <!ENTITY LWP-version                  "6.04">
-<!ENTITY Net-DNS-version              "0.68">
+<!ENTITY Net-DNS-version              "0.70">
 <!ENTITY SGMLSpm-version              "1.1">
 <!ENTITY URI-version                  "1.60">
 <!ENTITY XML-Parser-version           "2.41">

Modified: trunk/BOOK/introduction/welcome/changelog.xml
===================================================================
--- trunk/BOOK/introduction/welcome/changelog.xml	2012-12-10 23:49:21 UTC (rev 10885)
+++ trunk/BOOK/introduction/welcome/changelog.xml	2012-12-12 03:06:58 UTC (rev 10886)
@@ -44,6 +44,15 @@
 
 -->
     <listitem>
+      <para>December 12th, 2012</para>
+      <itemizedlist>
+        <listitem>
+          <para>[randy] - Updated Perl Modules.</para>
+        </listitem>
+      </itemizedlist>
+    </listitem>
+
+    <listitem>
       <para>December 11th, 2012</para>
       <itemizedlist>
         <listitem>

Modified: trunk/BOOK/xsoft/office/gnucash.xml
===================================================================
--- trunk/BOOK/xsoft/office/gnucash.xml	2012-12-10 23:49:21 UTC (rev 10885)
+++ trunk/BOOK/xsoft/office/gnucash.xml	2012-12-12 03:06:58 UTC (rev 10886)
@@ -268,8 +268,7 @@
         <xref linkend="perl-lwp"/>, <xref linkend="perl-date-manip"/>,
         <xref linkend="perl-html-parser"/>,
         <xref linkend="perl-html-tableextract"/>,
-        <ulink url="http://search.cpan.org/~nanis/Crypt-SSLeay/">
-        Crypt::SSLeay</ulink> and
+        <xref linkend="perl-crypt-ssleay"/> and
         <xref linkend="perl-finance-quote"/>. Alternatively, you can run the
         <command>gnc-fq-update</command> script as the
         <systemitem class="username">root</systemitem> user.




More information about the blfs-book mailing list