r3087 - in jhalfs/trunk: . CLFS CLFS2 HLFS LFS common

manuel at linuxfromscratch.org manuel at linuxfromscratch.org
Tue Aug 29 11:16:28 PDT 2006


Author: manuel
Date: 2006-08-29 12:16:27 -0600 (Tue, 29 Aug 2006)
New Revision: 3087

Added:
   jhalfs/trunk/blfs-tool
   jhalfs/trunk/jhalfs
Removed:
   jhalfs/trunk/CLFS/config
   jhalfs/trunk/CLFS2/config
   jhalfs/trunk/HLFS/config
   jhalfs/trunk/LFS/config
   jhalfs/trunk/blfs
   jhalfs/trunk/clfs
   jhalfs/trunk/clfs2
   jhalfs/trunk/common/config
   jhalfs/trunk/hlfs
   jhalfs/trunk/lfs
   jhalfs/trunk/master.sh
Modified:
   jhalfs/trunk/Config.in
   jhalfs/trunk/Makefile
   jhalfs/trunk/common/common-functions
   jhalfs/trunk/common/func_validate_configs.sh
Log:
Merged r3068:3072 from expoerimental:
cmdline and config files support removal.

Deleted: jhalfs/trunk/CLFS/config
===================================================================
--- jhalfs/trunk/CLFS/config	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/CLFS/config	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,79 +0,0 @@
-#####
-#
-# Configuration file for the CLFS module
-#
-# $Id$
-#
-#####
-
-#--- Which target architecture you want to build for,
-#    used to select proper book and set TARGETS
-#--------------------------------
-TARGET32=""
-TARGET=
-# >>>> 32-32 BUILD <<<<
- ARCH=x86 ;     TARGET="i486-pc-linux-gnu"
-# ARCH=x86 ;     TARGET="i586-pc-linux-gnu"
-# ARCH=x86 ;     TARGET="i686-pc-linux-gnu"
-# ARCH=ppc ;     TARGET="powerpc-unknown-linux-gnu"
-# ARCH=mips ;    TARGET="mipsel-unknown-linux-gnu"
-# ARCH=mips ;    TARGET="mips-unknown-linux-gnu"
-# ARCH=sparc ;   TARGET="sparcv9-unknown-linux-gnu"
-#--------------------------------
-# >>>> 64-64 BUILD <<<<
-# ARCH=x86_64-64  ; TARGET="x86_64-unknown-linux-gnu"
-# ARCH=mips64-64  ; TARGET="mips64el-unknown-linux-gnu"
-# ARCH=mips64-64  ; TARGET="mips64-unknown-linux-gnu"
-# ARCH=sparc64-64 ; TARGET="sparc64-unknown-linux-gnu"
-# ARCH=alpha	  ; TARGET="alpha-unknown-linux-gnu"
-#--------------------------------
-# >>>> MULTILIB 32/64 <<<<
-# ARCH=x86_64  ; TARGET="x86_64-unknown-linux-gnu"    ; TARGET32="i686-pc-linux-gnu"
-# ARCH=mips64  ; TARGET="mips64el-unknown-linux-gnu"  ; TARGET32="mipsel-unknown-linux-gnu"
-# ARCH=mips64  ; TARGET="mips64-unknown-linux-gnu"    ; TARGET32="mips-unknown-linux-gnu"
-# ARCH=sparc64 ; TARGET="sparc64-unknown-linux-gnu"   ; TARGET32="sparc-unknown-linux-gnu"
-# ARCH=ppc64   ; TARGET="powerpc64-unknown-linux-gnu" ; TARGET32="powerpc-unknown-linux-gnu"
-
-#--- What build method should be used chroot/boot
-#    NOTE: not all combinations are 'bootable' yet.
-METHOD=chroot
-
-#--- Unprivileged user and group name
-LUSER=clfs
-LGROUP=clfs
-
-#--- Location of fstab file (if empty, a template is created)
-FSTAB=
-
-#--- Fully qualified path to a kernel config file
-# If no config file is  specified the kernel is NOT compiled
-CONFIG=
-
-#--- If METHOD=boot, location of boot-kernel config file
-#    NOTE: this setting is required
-BOOT_CONFIG=
-
-# Get the kernel package and patches even if no configutation file
-# has been supplied? n(no)/y(yes)
-GETKERNEL=n
-
-#--- Book's sources directory
-# If you have previously checked out the book from the repository
-BOOK=
-
-#==== INTERNAL VARIABLES ====
-# Don't edit it unless you know what you are doing
-
-#--- Extra files that need be copied to $JHALFSDIR
-FILES=""
-
-#--- Default stylesheet
-XSL=clfs.xsl
-
-#--- Book version
-LFSVRS=development
-TREE=trunk/BOOK
-
-#--- Name of the makefile
-MKFILE=$JHALFSDIR/Makefile
-

Deleted: jhalfs/trunk/CLFS2/config
===================================================================
--- jhalfs/trunk/CLFS2/config	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/CLFS2/config	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,58 +0,0 @@
-#####
-#
-# Configuration file for the CLFS module
-#
-# $Id$
-#
-#####
-
-#--- Which target architecture you want to build for,
-#    used to select proper book and set TARGETS
-#--------------------------------
-TARGET=
-TARGET32=
-# >>>> 32-32 BUILD <<<<
-  ARCH=x86 ;     TARGET="i486-pc-linux-gnu"
-# ARCH=x86 ;     TARGET="i586-pc-linux-gnu"
-# ARCH=x86 ;     TARGET="i686-pc-linux-gnu"
-# ARCH=arm ;     TARGET="arm-unknown-linux-gnu"
-#--------------------------------
-# >>>> 64-64 BUILD <<<<
-#--------------------------------
-# >>>> MULTILIB 32/64 <<<<
-
-#--- Unprivileged user and group name
-LUSER=clfs
-LGROUP=clfs
-
-#--- Location of fstab file (if empty, a template is created)
-FSTAB=
-
-#--- Fully qualified path to a kernel config file
-# If no config file is  specified the kernel is NOT compiled
-CONFIG=
-
-# Get the kernel package and patches even if no configutation file
-# has been supplied? n(no)/y(yes)
-GETKERNEL=n
-
-#--- Book's sources directory
-# If you have previously checked out the book from the repository
-BOOK=
-
-#==== INTERNAL VARIABLES ====
-# Don't edit it unless you know what you are doing
-
-#--- Extra files that need be copied to $JHALFSDIR
-FILES=""
-
-#--- Default stylesheet
-XSL=clfs2.xsl
-
-#--- Book version
-LFSVRS=development
-TREE=branches/clfs-2.0/BOOK
-
-#--- Name of the makefile
-MKFILE=$JHALFSDIR/Makefile
-

Modified: jhalfs/trunk/Config.in
===================================================================
--- jhalfs/trunk/Config.in	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/Config.in	2006-08-29 18:16:27 UTC (rev 3087)
@@ -26,14 +26,19 @@
 			bool "Beyond Linux From Scratch"
 	endchoice
 
+	config	PROGNAME
+		string
+		default	"lfs"		if BOOK_LFS
+		default	"clfs"		if BOOK_CLFS
+		default	"clfs2"		if BOOK_CLFS2
+#		default	"clfs3"		if BOOK_CLFS3
+		default	"hlfs"		if BOOK_HLFS
+		default	"blfs"		if BOOK_BLFS
+
 	config	RUN_ME
 		string
-		default	"./lfs"		if BOOK_LFS
-		default	"./clfs"	if BOOK_CLFS
-		default	"./clfs2"	if BOOK_CLFS2
-#		default	"./clfs3"	if BOOK_CLFS3
-		default	"./hlfs"	if BOOK_HLFS
-		default	"./blfs"	if BOOK_BLFS
+		default	"./jhalfs run"	if !BOOK_BLFS
+		default	"./blfs-tool"	if BOOK_BLFS
 	#--- End BOOK/script
 
 	#--- Book version
@@ -386,6 +391,16 @@
 			#   Any missing file will be downloaded and archived here,
 			#   if the user has the right priviledges.
 
+	config SERVER
+		string "FTP mirror"
+		default "ftp://ftp.lfs-matrix.net"
+		depends GETPKG
+		help
+			#-- FTP mirror to download packages and patches if not found
+			#   in $SRC_ARCHIVE
+			#   As a last resort, the files will dowloaded from upstream,
+                        #   if possible.
+
 	config	GETKERNEL
 		bool	"Always retrieve kernel package"
 		default	n
@@ -627,9 +642,9 @@
 			#-- Run farce testing
 	#--- End ICA/farce
 
-	#-- Optimizations
+	#--- Optimizations
 	config	CONFIG_OPTIMIZE
-		bool	"Use optimization "
+		bool	"Use optimization (see help)"
 		default	n
 		help
 			#-- Actual optimzation flags MUST be defined in ./optimize/*
@@ -663,18 +678,47 @@
 		default	"2"	if OPT_2
 	#--- End Optimizations
 
+	#-- Internal Settings
+	menu "--- Internal Settings (WARNING: for jhalfs developers only)"
+
+		config	SCRIPT_ROOT
+			string	"Scripts root"
+			default "jhalfs"
+
+		config	JHALFSDIR
+			string "jhalfs directory"
+			default "$BUILDDIR/$SCRIPT_ROOT"
+
+		config	LOGDIR
+			string "Build logs directory"
+			default "$JHALFSDIR/logs"
+
+		config	TESTLOGDIR
+			string "Test suites logs directory"
+			default "$JHALFSDIR/test-logs"
+
+		config	ICALOGDIR
+			string "ICA logs directory"
+			default "$LOGDIR/ICA"
+
+		config	FARCELOGDIR
+			string "farce logs directory"
+			default "$LOGDIR/farce"
+
+		config	MKFILE
+			string "Makefile"
+			default "$JHALFSDIR/Makefile"
+
+		config	XSL
+			string "XSL stylesheet"
+			default "$PROGNAME.xsl"
+
+		config	PKG_LST
+			string "Package contents list"
+			default "unpacked"
+
+	#--- End Internal Settings
+	endmenu
+
 #--- End Advanced Features
 endmenu
-
-#	config	CONFIG_BLFS_CMDS
-#		bool	"Add BLFS packages to current build"
-#		default	n
-#		depends	!BOOK_HLFS && XXX
-#		help
-#			#--- Select this option if you wish to install any BLFS packages
-#			#    as part of your {c,h}lfs build.
-#			#    Any needed packages will be downloaded to the /sources dir
-#	config	BLFS_CMDLINE
-#		string	"BLFS packages"
-#		default	"none"
-#		depends	CONFIG_BLFS_CMDS

Deleted: jhalfs/trunk/HLFS/config
===================================================================
--- jhalfs/trunk/HLFS/config	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/HLFS/config	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,48 +0,0 @@
-#####
-#
-# Configuration file for the HLFS module
-#
-# $Id$
-#
-#####
-
-#--- Which library model to use uclibc/glibc
-MODEL=glibc
-
-#--- The host system has grsecurity options enabled? n(no)/y(yes)
-GRSECURITY_HOST=n
-
-#--- Unprivileged user and group name
-LUSER=hlfs
-LGROUP=hlfs
-
-#--- Location of fstab file (if empty, a template is created)
-FSTAB=
-
-#--- Fully qualified path to a kernel config file
-# If no config file is  specified the kernel is NOT compiled
-CONFIG=
-
-# Get the kernel package and patches even if no configutation file
-# has been supplied? n(no)/y(yes)
-GETKERNEL=n
-
-#--- Book's sources directory
-# If you have previously checked out the book from the repository
-BOOK=
-
-#==== INTERNAL VARIABLES ====
-# Don't edit it unless you know what you are doing
-
-#--- Extra files that need be copied to $JHALFSDIR
-FILES=""
-
-#--- Default stylesheet
-XSL=hlfs.xsl
-
-#--- Book version
-LFSVRS=development
-TREE=trunk/BOOK
-
-#--- Name of the makefile
-MKFILE=$JHALFSDIR/Makefile

Deleted: jhalfs/trunk/LFS/config
===================================================================
--- jhalfs/trunk/LFS/config	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/LFS/config	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,42 +0,0 @@
-#####
-#
-# Configuration file for the LFS module
-#
-# $Id$
-#
-#####
-
-#--- Unprivileged user and group name
-LUSER=lfs
-LGROUP=lfs
-
-#--- Location of fstab file (if empty, a template is created)
-FSTAB=
-
-#--- Fully qualified path to a kernel config file
-# If no config file is specified the kernel is NOT compiled
-CONFIG=
-
-# Get the kernel package and patches even if no configuration file
-# has been supplied? n(no)/y(yes)
-GETKERNEL=n
-
-#--- Book's sources directory
-# If you have previously checked out the book from the repository
-BOOK=
-
-#==== INTERNAL VARIABLES ====
-# Don't edit it unless you know what you are doing
-
-#--- Extra files that need be copied to $JHALFSDIR
-FILES=""
-
-#--- Default stylesheet
-XSL=lfs.xsl
-
-#--- Book version
-LFSVRS=development
-TREE=trunk/BOOK
-
-#--- Name of the makefile
-MKFILE=$JHALFSDIR/Makefile

Modified: jhalfs/trunk/Makefile
===================================================================
--- jhalfs/trunk/Makefile	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/Makefile	2006-08-29 18:16:27 UTC (rev 3087)
@@ -7,11 +7,8 @@
 CONFIG = menu
 
 all: menuconfig
-	@clear
-	@touch using_menuconfig
-	@`grep RUN_ME configuration | sed -e 's at RUN_ME=\"@@' -e 's@\"@@' ` || rm -f using_menuconfig
-	@rm -f using_menuconfig
-	
+#	@clear
+	@`grep RUN_ME configuration | sed -e 's at RUN_ME=\"@@' -e 's@\"@@' `
 
 $(CONFIG)/conf:
 	$(MAKE) -C $(CONFIG) conf

Deleted: jhalfs/trunk/blfs
===================================================================
--- jhalfs/trunk/blfs	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/blfs	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,140 +0,0 @@
-#!/bin/bash
-# $Id$
-
-set -e
-
-# From common/common-functions
-# VT100 colors
-declare -r  BLACK=$'\e[1;30m'
-declare -r  DK_GRAY=$'\e[0;30m'
-
-declare -r  RED=$'\e[31m'
-declare -r  GREEN=$'\e[32m'
-declare -r  YELLOW=$'\e[33m'
-declare -r  BLUE=$'\e[34m'
-declare -r  MAGENTA=$'\e[35m'
-declare -r  CYAN=$'\e[36m'
-declare -r  WHITE=$'\e[37m'
-
-declare -r  OFF=$'\e[0m'
-declare -r  BOLD=$'\e[1m'
-declare -r  REVERSE=$'\e[7m'
-declare -r  HIDDEN=$'\e[8m'
-
-declare -r  tab_=$'\t'
-declare -r  nl_=$'\n'
-
-declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
-declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
-declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
-
-# bold yellow > <  pair
-declare -r R_arrow=$'\e[1;33m>\e[0m'
-declare -r L_arrow=$'\e[1;33m<\e[0m'
-
-
-#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
-#-----------------------#
-simple_error() {        # Basic error trap.... JUST DIE
-#-----------------------#
-  # If +e then disable text output
-  if [[ "$-" =~ "e" ]]; then
-    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
-  fi
-}
-
-see_ya() {
-    echo -e "\n${L_arrow}${BOLD}jhalfs${R_arrow} exit${OFF}\n"
-}
-##### Simple error TRAPS
-# ctrl-c   SIGINT
-# ctrl-y
-# ctrl-z   SIGTSTP
-# SIGHUP   1 HANGUP
-# SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
-# SIGQUIT  3
-# SIGKILL  9 KILL
-# SIGTERM 15 TERMINATION
-# SIGSTOP 17,18,23 STOP THE PROCESS
-#####
-set -e
-trap see_ya 0
-trap simple_error ERR
-trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
-#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
-# envars not sourced from configuration file
-  PROGNAME=$(basename $0)
-COMMON_DIR="common"
- VERBOSITY=1
-
-[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
-source configuration
-[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
-[[ $VERBOSITY > 0 ]] && echo "OK"
-
-[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
-source $COMMON_DIR/func_validate_configs.sh
-[[ $? > 0 ]] && echo " function module did not load.." && exit 2
-[[ $VERBOSITY > 0 ]] && echo "OK"
-[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
-
-# Be sure that we have a configuration file
-[[ -z $BOOK_BLFS ]] && echo -e "\nNo BLFS configuration found. Please configure it." && exit 1
-
-# Set default book version
-BRANCH_ID=${BRANCH_ID:=development}
-
-# Set the SVN tree
-case $BRANCH_ID in
-  dev* | SVN | trunk )  TREE=trunk/BOOK ;;
-              *EDIT* )  echo " You forgot to set the branch or stable book version."
-                        echo " Please rerun make and fix the configuration."
-                        exit 2
-                        ;;
-            branch-* )  TREE=branches/${BRANCH_ID#branch-}/BOOK ;;
-                   * )  TREE=tags/${BRANCH_ID}/BOOK ;;
-esac
-
-# For consistency with other books
-validate_config
-echo "${SD_BORDER}${nl_}"
-echo -n "Are you happy with these settings? yes/no (no): "
-read ANSWER
-if [ x$ANSWER != "xyes" ] ; then
-  echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
-  exit 1
-fi
-echo "${nl_}${SD_BORDER}${nl_}"
-
-# Install the files
-[[ ! -d $BLFS_ROOT ]] && mkdir -p $BLFS_ROOT
-
-cp -r BLFS/* $BLFS_ROOT
-cp -r menu $BLFS_ROOT
-cp $COMMON_DIR/progress_bar.sh $BLFS_ROOT
-cp README.BLFS $BLFS_ROOT
-
-# Start the work
-cd $BLFS_ROOT
-
-# Clean-up
-rm -rf libs/.svn
-rm -rf menu/.svn
-rm -rf menu/lxdialog/.svn
-
-
-# Set some harcoded envars to their proper values
-sed -i 's,blfs-xml,'$BLFS_XML',' update_book.sh libs/book.xsl
-sed -i 's,tracking-dir,'$TRACKING_DIR',' update_book.sh gen-makefile.sh
-
-# Fetch book sources and create packages and meta-packages dependencies files
-if [[ -d $BLFS_XML ]] ; then
-  ./update_book.sh
-else
-  ./update_book.sh get $BLFS_XML $TREE
-fi
-
-# Run the menuconfig interface
-make
-

Copied: jhalfs/trunk/blfs-tool (from rev 3072, jhalfs/branches/experimental/blfs-tool)
===================================================================
--- jhalfs/trunk/blfs-tool	                        (rev 0)
+++ jhalfs/trunk/blfs-tool	2006-08-29 18:16:27 UTC (rev 3087)
@@ -0,0 +1,139 @@
+#!/bin/bash
+# $Id$
+
+set -e
+
+# From common/common-functions
+# VT100 colors
+declare -r  BLACK=$'\e[1;30m'
+declare -r  DK_GRAY=$'\e[0;30m'
+
+declare -r  RED=$'\e[31m'
+declare -r  GREEN=$'\e[32m'
+declare -r  YELLOW=$'\e[33m'
+declare -r  BLUE=$'\e[34m'
+declare -r  MAGENTA=$'\e[35m'
+declare -r  CYAN=$'\e[36m'
+declare -r  WHITE=$'\e[37m'
+
+declare -r  OFF=$'\e[0m'
+declare -r  BOLD=$'\e[1m'
+declare -r  REVERSE=$'\e[7m'
+declare -r  HIDDEN=$'\e[8m'
+
+declare -r  tab_=$'\t'
+declare -r  nl_=$'\n'
+
+declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
+declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
+declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
+
+# bold yellow > <  pair
+declare -r R_arrow=$'\e[1;33m>\e[0m'
+declare -r L_arrow=$'\e[1;33m<\e[0m'
+
+
+#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
+#-----------------------#
+simple_error() {        # Basic error trap.... JUST DIE
+#-----------------------#
+  # If +e then disable text output
+  if [[ "$-" =~ "e" ]]; then
+    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
+  fi
+}
+
+see_ya() {
+    echo -e "\n${L_arrow}${BOLD}jhalfs-X${R_arrow} exit${OFF}\n"
+}
+##### Simple error TRAPS
+# ctrl-c   SIGINT
+# ctrl-y
+# ctrl-z   SIGTSTP
+# SIGHUP   1 HANGUP
+# SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
+# SIGQUIT  3
+# SIGKILL  9 KILL
+# SIGTERM 15 TERMINATION
+# SIGSTOP 17,18,23 STOP THE PROCESS
+#####
+set -e
+trap see_ya 0
+trap simple_error ERR
+trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
+#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
+# envars not sourced from configuration file
+COMMON_DIR="common"
+VERBOSITY=1
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
+source configuration
+[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
+source $COMMON_DIR/func_validate_configs.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
+
+# Be sure that we have a configuration file
+[[ -z $BOOK_BLFS ]] && echo -e "\nNo BLFS configuration found. Please configure it." && exit 1
+
+# Set default book version
+BRANCH_ID=${BRANCH_ID:=development}
+
+# Set the SVN tree
+case $BRANCH_ID in
+  dev* | SVN | trunk )  TREE=trunk/BOOK ;;
+              *EDIT* )  echo " You forgot to set the branch or stable book version."
+                        echo " Please rerun make and fix the configuration."
+                        exit 2
+                        ;;
+            branch-* )  TREE=branches/${BRANCH_ID#branch-}/BOOK ;;
+                   * )  TREE=tags/${BRANCH_ID}/BOOK ;;
+esac
+
+# For consistency with other books
+validate_config
+echo "${SD_BORDER}${nl_}"
+echo -n "Are you happy with these settings? yes/no (no): "
+read ANSWER
+if [ x$ANSWER != "xyes" ] ; then
+  echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
+  exit 1
+fi
+echo "${nl_}${SD_BORDER}${nl_}"
+
+# Install the files
+[[ ! -d $BLFS_ROOT ]] && mkdir -p $BLFS_ROOT
+
+cp -r BLFS/* $BLFS_ROOT
+cp -r menu $BLFS_ROOT
+cp $COMMON_DIR/progress_bar.sh $BLFS_ROOT
+cp README.BLFS $BLFS_ROOT
+
+# Start the work
+cd $BLFS_ROOT
+
+# Clean-up
+rm -rf libs/.svn
+rm -rf menu/.svn
+rm -rf menu/lxdialog/.svn
+
+
+# Set some harcoded envars to their proper values
+sed -i 's,blfs-xml,'$BLFS_XML',' update_book.sh libs/book.xsl
+sed -i 's,tracking-dir,'$TRACKING_DIR',' update_book.sh gen-makefile.sh
+
+# Fetch book sources and create packages and meta-packages dependencies files
+if [[ -d $BLFS_XML ]] ; then
+  ./update_book.sh
+else
+  ./update_book.sh get $BLFS_XML $TREE
+fi
+
+# Run the menuconfig interface
+make
+


Property changes on: jhalfs/trunk/blfs-tool
___________________________________________________________________
Name: svn:executable
   + *
Name: svn:keywords
   + Author Date Revision Id

Deleted: jhalfs/trunk/clfs
===================================================================
--- jhalfs/trunk/clfs	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/clfs	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1 +0,0 @@
-link master.sh
\ No newline at end of file

Deleted: jhalfs/trunk/clfs2
===================================================================
--- jhalfs/trunk/clfs2	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/clfs2	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1 +0,0 @@
-link master.sh
\ No newline at end of file

Modified: jhalfs/trunk/common/common-functions
===================================================================
--- jhalfs/trunk/common/common-functions	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/common/common-functions	2006-08-29 18:16:27 UTC (rev 3087)
@@ -2,175 +2,9 @@
 
 # $Id$
 
-set +e
+set -e
 
-# VT100 colors
-declare -r  BLACK=$'\e[1;30m'
-declare -r  DK_GRAY=$'\e[0;30m'
 
-declare -r  RED=$'\e[31m'
-declare -r  GREEN=$'\e[32m'
-declare -r  YELLOW=$'\e[33m'
-declare -r  BLUE=$'\e[34m'
-declare -r  MAGENTA=$'\e[35m'
-declare -r  CYAN=$'\e[36m'
-declare -r  WHITE=$'\e[37m'
-
-declare -r  OFF=$'\e[0m'
-declare -r  BOLD=$'\e[1m'
-declare -r  REVERSE=$'\e[7m'
-declare -r  HIDDEN=$'\e[8m'
-
-declare -r  tab_=$'\t'
-declare -r  nl_=$'\n'
-
-declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
-declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
-declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
-
-# bold yellow > <  pair
-declare -r R_arrow=$'\e[1;33m>\e[0m'
-declare -r L_arrow=$'\e[1;33m<\e[0m'
-
-
-usage() {
-cat <<- -EOF-
-${DD_BORDER}
-${BOLD}
- Usage: $0 ${BOLD}[OPTION]
-
-${RED}IMPORTANT:${OFF} Only supported command line switches are listed here.
-           For more fine-grained setups you must edit the relevant
-           configuration files placed under ${BOLD}common/${OFF} and ${BOLD}$(echo $PROGNAME | tr [a-z] [A-Z])/${OFF}
-
-Options:
-${BOLD}  -h, --help${OFF}
-        print this help, then exit
-
-${BOLD}  -V, --version${OFF}
-        print version information, then exit
-
-${BOLD}  -B, --book VER${OFF}
-        use VER version of the book as the system to build.
-        Supported VER values are:
-          dev*, trunk, SVN = aliases for the Development version of {C,H}LFS
-          branch-NAME = a branch of name NAME
-          VERSION = the version of a stable released book
-        To know what branches and stable books work with this version of jhalfs
-        please see http://wiki.linuxfromscratch.org/alfs/wiki/SupportedBooks
-
-${BOLD}  -D  --directory DIR${OFF}
-        use DIR directory for building ${BOLD}$(echo $PROGNAME | tr [a-z] [A-Z])${OFF}; all files jhalfs produces
-        will be in the directory DIR/${SCRIPT_ROOT}.
-        The current setting for BUILDDIR is "$BUILDDIR"
-
-${BOLD}  -G, --get-packages${OFF}
-        download the packages and patches. This assumes that the server declared
-        in the configuration file has the proper packages and patches for the
-        book version being processed.
-
-${BOLD}  -O, --optimize${OFF}
-        Optimize [0-2]
-          0 = no optimization
-          1 = optimize final system only
-          2 = optimize both temporary tools and final system
-        Edit common/opt_config{,.d/*} and common/opt_override as desired.
-
-${BOLD}  -T, --testsuites N ${OFF}
-        Run test suites  [0-3]
-          0 = none
-          1 = only final system Glibc, GCC and Binutils testsuites
-          2 = all final system testsuites
-          3 = all temporary tools and final system testsuites
-        In CLFS and HLFS, 3 is an alias to 2
-
-${BOLD}  -W, --working-copy DIR${OFF}
-        use the local working copy placed in DIR as the $(echo $PROGNAME | tr [a-z] [A-Z]) book
-
-${BOLD}  -C, --comparison TYPE${OFF}
-         do iterative comparison analysis. This extends the total build time
-         considerably because the entire final system will rebuild itself
-         the number of times specified by ITERATIONS in common/config.
-         Types allowed are:
-           ICA   = do ICA as designed by Greg Schafer
-           farce = do the farce analysis designed by Ken Moffat
-           both  = perform both ICA and farce analysis
-
-${BOLD}  -F, --fstab FILE${OFF}
-        use FILE as the /etc/fstab file for the ${BOLD}$(echo $PROGNAME | tr [a-z] [A-Z])${OFF} system. If not specified,
-        a default /etc/fstab file with dummy values is created.
-
-${BOLD}  -K, --kernel-config FILE${OFF}
-        use the kernel configuration file specified in FILE to build the kernel.
-        if the file is not found, or if not specified, the kernel build is skipped.
-
-${BOLD}  -M, --run-make${OFF}
-        run make on the generated Makefile
-
-${BOLD}  -R --rebuild${OFF}
-        clean the build directory before performing any other task. The directory
-        is cleaned only if it was populated by a previous jhalfs run.
--EOF-
-
-[[ ${PROGNAME} = "clfs" ]] &&
-cat <<- -EOF-
-
-${BOLD}  -A, --arch ARCH ${OFF}
-        Select the TARGET architecture, valid selections are:
-           32bit builds
-        x86, i486, i586, ppc, mips, mipsel, sparc
-           64bit builds
-        x86_64-64, mips64-64, mipsel64-64, sparc64-64, alpha
-           64bit multi-lib
-        x86_64, mips64, mipsel64, sparc64, ppc64
-
-${BOLD}  --boot-config FILE ${OFF}
-        The configuration file for the bootstrap kernel if method=boot
-
-${BOLD}  --method BUILDMETHOD ${OFF}
-        Select the build method, chroot or boot
--EOF-
-
-[[ ${PROGNAME} = "clfs2" ]] &&
-cat <<- -EOF-
-
-${BOLD}  -A, --arch ARCH ${OFF}
-        Select the TARGET architecture, valid selections are:
-           32bit builds
-        arm
-           64bit builds
-
-	64bit multi-lib
--EOF-
-
-[[ ${PROGNAME} = "hlfs" ]] &&
-cat <<- -EOF-
-
-${BOLD}  --model STYLE ${OFF}
-        Select the library model for the HLFS system
-        Valid choices are: glibc or uclibc
--EOF-
-
-cat <<- -EOF-
-${DD_BORDER}
--EOF-
-  exit
-}
-
-version="
-${BOLD}  \"jhalfs\"${OFF} builder tool (development) \$Rev$
-\$Date$
-
-${BOLD}              \"${PROGNAME}\"${OFF} script module
-
-Written by George Boudreau,
-           Manuel Canales Esparcia,
-           Jeremy Huntwork
-
-This program is published under the ${BOLD}Gnu General Public License, Version 2.${OFF}
-"
-
-
 no_empty_builddir() {
   'clear'
 cat <<- -EOF-
@@ -189,13 +23,6 @@
 }
 
 
-help="${nl_}Try '$0 --help' for more information."
-
-exit_missing_arg="\
-echo \"Option '\$1' requires an argument\" >&2
-echo \"\$help\" >&2
-exit 1"
-
 HEADER="# This file is automatically generated by jhalfs
 # DO NOT EDIT THIS FILE MANUALLY
 #
@@ -620,7 +447,7 @@
 #----------------------------#
   cd $JHALFSDIR
 
-  if [ -z $WC ] ; then
+  if [ -z $WORKING_COPY ] ; then
     # Check for Subversion instead of just letting the script hit 'svn' and fail.
     test `type -p svn` || eval "echo \"This feature requires Subversion.\"
     exit 1"

Deleted: jhalfs/trunk/common/config
===================================================================
--- jhalfs/trunk/common/config	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/common/config	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,110 +0,0 @@
-#####
-#
-# common configuration file
-#
-# $Id$
-#####
-
-declare -r SVN="svn://svn.linuxfromscratch.org"
-declare -r LOG=000-masterscript.log
-
-#--- Mount point for the build
-BUILDDIR=/mnt/build_dir
-
-# Create SBU and disk usage report  n(no)/y(yes)
-# NOTE: requires to have bc installed on the host
-REPORT=y
-
-#=== Getting packages ===
-#    Files will be retrieved from the local archive SRC_ARCHIVE
-#    (if defined) or the 'net and will be stored in $BUILDDIR/sources
-#--- Download the source packages n(no)/y(yes)
-GETPKG=n
-
-#--- The local repository for packages/file
-#    Used only if GETPKG = y
-#    Any missing file will be downloaded and archived here,
-#    if the user has the right priviledges.
-SRC_ARCHIVE=$SRC_ARCHIVE
-
-# --- Server used if the file isn't found in SRC_ARCHIVE.
-# As a last resort, the file will dowloaded from upstream, if possible.
-SERVER=ftp://ftp.lfs-matrix.net
-
-#=== Build options ===
-#--- Automatically run the makefile once it has been created  n(no)/y(yes)
-RUNMAKE=n
-
-#--- Optimize the build  [0-2]
-#  0 = no optimization
-#  1 = optimize final system only
-#  2 = optimize both temporary tools and final system
-#
-# Optimization values are set in optimize/* files
-OPTIMIZE=0
-
-#--- Run test suites  [0-3]
-#  0 = none
-#  1 = only chapter06 Glibc, GCC and Binutils testsuites
-#  2 = all chapter06 testsuites
-#  3 = all chapter05 and chapter06 testsuites
-#      (in CLFS and HLFS, alias to 2)
-TEST=1
-
-#--- Bomb on test suites failures?
-#  n = no, I want to build the full system and review the logs
-#  y = yes, bomb at the first test suite failure to can review the build dir
-BOMB_TEST=n
-
-#--- Run the stripping phases  n(no)/y(yes)
-STRIP=y
-
-#--- page definition for groff letter/A4
-PAGE=letter
-
-#--- set default timezone.
-TIMEZONE=${TZ:-GMT}
-
-#--- install the optional vim-lang package  n(no)/y(yes)
-VIMLANG=y
-
-#--- Language information in /etc/profile  See <locale -a> for values
-LANG=$LANG
-LC_ALL=$LC_ALL # (not used in LFS)
-
-#--- Include the keymap in the kernel if defined. Path to the
-#    keymap file relative to /usr/share/kbd/keymaps/
-#    (e.g., i386/qwerty/us.map.gz) or "none"
-#    Not used in LFS
-KEYMAP=none
-
-#=== Variables needed by iterative comparison analysis ===
-#--- Should some iterative comparison analysis by made? n(no)/y(yes)
-COMPARE=n
-
-#--- The number of final stage builds to create and compare, min. 2, max. 5
-ITERATIONS=3
-
-#--- Run ICA testing n(no)/y(yes)
-RUN_ICA=n
-
-#--- Run farce testing n(no)/y(yes)
-RUN_FARCE=n
-
-#==== INTERNAL VARIABLES ====
-# Don't edit it unless you know what you are doing
-
-#--- Working directories
-SCRIPT_ROOT=jhalfs
-  JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
-     LOGDIR=$JHALFSDIR/logs
- TESTLOGDIR=$JHALFSDIR/test-logs
-
-#--- File listing package contents (from where package sources dir is extracted)
-PKG_LST=unpacked
-
-#--- ICA report log directory
-ICALOGDIR=$LOGDIR/ICA
-
-#--- farce report log directory
-FARCELOGDIR=$LOGDIR/farce

Modified: jhalfs/trunk/common/func_validate_configs.sh
===================================================================
--- jhalfs/trunk/common/func_validate_configs.sh	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/common/func_validate_configs.sh	2006-08-29 18:16:27 UTC (rev 3087)
@@ -2,75 +2,7 @@
 
 declare -r dotSTR=".................."
 
-#----------------------------#
-validate_target() {          #
-#----------------------------#
-  local -r ERROR_MSG_pt1='The variable \"${L_arrow}TARGET${R_arrow}\" value ${L_arrow}${BOLD}${TARGET}${R_arrow} is invalid for the ${L_arrow}${BOLD}${ARCH}${R_arrow} architecture'
-  local -r ERROR_MSG_pt2='  check the config file ${BOLD}${GREEN}\<$(echo $PROGNAME | tr [a-z] [A-Z])/config\> or \<common/config\>${OFF}'
 
-  local -r PARAM_VALS='TARGET${dotSTR:6} ${L_arrow}${BOLD}${TARGET}${OFF}${R_arrow}'
-  local -r PARAM_VALS2='TARGET32${dotSTR:8} ${L_arrow}${BOLD}${TARGET32}${OFF}${R_arrow}'
-
-  write_error_and_die() {
-    echo -e "\n${DD_BORDER}"
-    echo -e "`eval echo ${ERROR_MSG_pt1}`" >&2
-    echo -e "`eval echo ${ERROR_MSG_pt2}`" >&2
-    echo -e "${DD_BORDER}\n"
-    exit 1
-  }
-
- if [[ ! "${TARGET32}" = "" ]]; then
-    echo -e "`eval echo $PARAM_VALS2`"
- fi
- echo -e "`eval echo $PARAM_VALS`"
-
- case "${ARCH}" in
-   "x86")        [[ "${TARGET}" = "i486-pc-linux-gnu" ]] && return
-                 [[ "${TARGET}" = "i586-pc-linux-gnu" ]] && return
-                 [[ "${TARGET}" = "i686-pc-linux-gnu" ]] && return
-    ;;
-   "ppc")        [[ "${TARGET}" = "powerpc-unknown-linux-gnu" ]] && return
-    ;;
-   "mips")       [[ "${TARGET}" = "mipsel-unknown-linux-gnu" ]] && return
-                 [[ "${TARGET}" = "mips-unknown-linux-gnu"   ]] && return
-    ;;
-   "sparc")      [[ "${TARGET}" = "sparcv9-unknown-linux-gnu" ]] && return
-    ;;
-   "x86_64-64")  [[ "${TARGET}" = "x86_64-unknown-linux-gnu" ]] && return
-    ;;
-   "mips64-64")  [[ "${TARGET}" = "mips64el-unknown-linux-gnu" ]] && return
-                 [[ "${TARGET}" = "mips64-unknown-linux-gnu"   ]] && return
-    ;;
-   "sparc64-64") [[ "${TARGET}" = "sparc64-unknown-linux-gnu" ]] && return
-    ;;
-   "alpha")      [[ "${TARGET}" = "alpha-unknown-linux-gnu" ]] && return
-    ;;
-   "x86_64")     [[ "${TARGET}"   = "x86_64-unknown-linux-gnu" ]] &&
-                 [[ "${TARGET32}" = "i686-pc-linux-gnu" ]] && return
-    ;;
-   "mips64")     [[ "${TARGET}"   = "mips64el-unknown-linux-gnu" ]] &&
-                 [[ "${TARGET32}" = "mipsel-unknown-linux-gnu" ]] && return
-
-                 [[ "${TARGET}"   = "mips64-unknown-linux-gnu" ]] &&
-                 [[ "${TARGET32}" = "mips-unknown-linux-gnu" ]] && return
-    ;;
-   "sparc64")    [[ "${TARGET}"   = "sparc64-unknown-linux-gnu" ]] &&
-                 [[ "${TARGET32}" = "sparc-unknown-linux-gnu" ]] && return
-    ;;
-   "ppc64")      [[ "${TARGET}"   = "powerpc64-unknown-linux-gnu" ]] &&
-                 [[ "${TARGET32}" = "powerpc-unknown-linux-gnu"   ]] && return
-    ;;
-   "arm")        [[ "${TARGET}"   = "arm-unknown-linux-gnu" ]] && return
-    ;;
-   *)  write_error_and_die
-   ;;
- esac
-
-   # If you end up here then there was an error SO...
-   write_error_and_die
-}
-
-
 #----------------------------#
 validate_config() {          # Are the config values sane (within reason)
 #----------------------------#
@@ -88,10 +20,10 @@
 inline_doc
 
   # First internal variables, then the ones that change the book's flavour, and lastly system configuration variables
-  local -r  hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL GRSECURITY_HOST TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL KEYMAP         PAGE TIMEZONE LANG LC_ALL LUSER LGROUP"
-  local -r  clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD  ARCH  TARGET  TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG        LUSER LGROUP"
-  local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE         ARCH  TARGET                 OPTIMIZE REPORT                                      STRIP FSTAB             CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG        LUSER LGROUP"
-  local -r   lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE                       TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL        VIMLANG PAGE TIMEZONE LANG        LUSER LGROUP"
+  local -r  hlfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE MODEL  GRSECURITY_HOST      TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL KEYMAP         PAGE TIMEZONE LANG LC_ALL LUSER LGROUP"
+  local -r  clfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE METHOD ARCH TARGET TARGET32 TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB BOOT_CONFIG CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG        LUSER LGROUP"
+  local -r clfs2_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE        ARCH TARGET                         OPTIMIZE REPORT                                      STRIP FSTAB             CONFIG GETKERNEL KEYMAP VIMLANG PAGE TIMEZONE LANG        LUSER LGROUP"
+  local -r   lfs_PARAM_LIST="BOOK BUILDDIR SRC_ARCHIVE GETPKG RUNMAKE                             TEST BOMB_TEST OPTIMIZE REPORT COMPARE RUN_ICA RUN_FARCE ITERATIONS STRIP FSTAB             CONFIG GETKERNEL        VIMLANG PAGE TIMEZONE LANG        LUSER LGROUP"
   local -r  blfs_PARAM_LIST="BRANCH_ID BLFS_ROOT BLFS_XML TRACKING_DIR"
 
   local -r ERROR_MSG_pt1='The variable \"${L_arrow}${config_param}${R_arrow}\" value ${L_arrow}${BOLD}${!config_param}${R_arrow} is invalid,'
@@ -111,16 +43,6 @@
     exit 1
   }
 
-  validate_against_str() {
-     # This is the 'regexp' test available in bash-3.0..
-     # using it as a poor man's test for substring
-     echo -e "`eval echo $PARAM_VALS`"
-     if [[ ! "$1" =~ "x${!config_param}x" ]] ; then
-       # parameter value entered is no good
-       write_error_and_die
-     fi
-  }
-
   validate_file() {
      # For parameters ending with a '+' failure causes a warning message only
      echo -n "`eval echo $PARAM_VALS`"
@@ -172,17 +94,41 @@
   set +e
   PARAM_GROUP=${PROGNAME}_PARAM_LIST
   for config_param in ${!PARAM_GROUP}; do
-    # This is a tricky little piece of code.. executes a cmd string.
     case $config_param in
-      TIMEZONE)   echo -e "`eval echo $PARAM_VALS`" ;;
+      # Allways display this, if found in ${PROGNAME}_PARAM_LIST
+      GETPKG          | \
+      RUNMAKE         | \
+      TEST            | \
+      OPTIMIZE        | \
+      STRIP           | \
+      VIMLANG         | \
+      MODEL           | \
+      METHOD          | \
+      ARCH            | \
+      TARGET          | \
+      GRSECURITY_HOST | \
+      TIMEZONE        | \
+      PAGE)   echo -e "`eval echo $PARAM_VALS`" ;;
 
-      # Validate general parameters..
-      GETPKG)     validate_against_str "xnx xyx" ;;
+      # Envvars that depend on other settings to be displayed
       GETKERNEL ) if [[ -z "$CONFIG" ]] && [[ -z "$BOOT_CONFIG" ]] ; then
-                    [[ "$GETPKG" = "y" ]] && validate_against_str "xnx xyx"
+                    [[ "$GETPKG" = "y" ]] && echo -e "`eval echo $PARAM_VALS`"
                   fi ;;
-      RUNMAKE)    validate_against_str "xnx xyx" ;;
-      REPORT)     validate_against_str "xnx xyx"
+      COMPARE)    [[ ! "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      RUN_ICA)    [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      RUN_FARCE)  [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      ITERATIONS) [[ "$COMPARE" = "y" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      BOMB_TEST)  [[ ! "$TEST" = "0" ]] && echo -e "`eval echo $PARAM_VALS`" ;;
+      TARGET32)   [[ -n "${TARGET32}" ]] &&  echo -e "`eval echo $PARAM_VALS`" ;;
+
+      # Envars that requires some validation
+      LUSER)      echo -e "`eval echo $PARAM_VALS`"
+                  [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
+                  ;;
+      LGROUP)     echo -e "`eval echo $PARAM_VALS`"
+                  [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
+                  ;;
+      REPORT)     echo -e "`eval echo $PARAM_VALS`"
                   if [[ "${!config_param}" = "y" ]]; then
                     if [[ `type -p bc` ]]; then
                       continue
@@ -193,63 +139,30 @@
                       continue
                     fi
                   fi ;;
-      COMPARE)    if [[ ! "$COMPARE" = "y" ]]; then
-                    validate_against_str "xnx xyx"
-                  else
-                    if [[ ! "${RUN_ICA}" = "y" ]] && [[ ! "${RUN_FARCE}" = "y" ]]; then
-                       echo  "${nl_}${DD_BORDER}"
-                       echo  "You have elected to analyse your build but have failed to select a tool." >&2
-                       echo  "Edit /common/config and set ${L_arrow}${BOLD}RUN_ICA${R_arrow} and/or ${L_arrow}${BOLD}RUN_FARCE${R_arrow} to the required values" >&2
-                       echo  "${DD_BORDER}${nl_}"
-                       exit 1
-                    fi
-                  fi ;;
-      RUN_ICA)    [[ "$COMPARE" = "y" ]] && validate_against_str "xnx xyx" ;;
-      RUN_FARCE)  [[ "$COMPARE" = "y" ]] && validate_against_str "xnx xyx" ;;
-      ITERATIONS) [[ "$COMPARE" = "y" ]] && validate_against_str "x2x x3x x4x x5x" ;;
-      TEST)       validate_against_str "x0x x1x x2x x3x" ;;
-      BOMB_TEST)  [[ ! "$TEST" = "0" ]] && validate_against_str "xnx xyx" ;;
-      OPTIMIZE)   validate_against_str "x0x x1x x2x" ;;
-      STRIP)      validate_against_str "xnx xyx" ;;
-      VIMLANG)    validate_against_str "xnx xyx" ;;
-      MODEL)      validate_against_str "xglibcx xuclibcx" ;;
-      PAGE)       validate_against_str "xletterx xA4x" ;;
-      METHOD)     validate_against_str "xchrootx xbootx" ;;
-      ARCH)       validate_against_str "xx86x xx86_64x xx86_64-64x xsparcx xsparc64x xsparc64-64x xmipsx xmips64x xmips64-64x xppcx xppc64x xalphax xarmx" ;;
-      TARGET)     validate_target ;;
-      LUSER)      echo -e "`eval echo $PARAM_VALS`"
-                  [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
-		  ;;
-      LGROUP)     echo -e "`eval echo $PARAM_VALS`"
-                  [[ "${!config_param}" = "**EDIT ME**" ]] && write_error_and_die
-                  ;;
-      GRSECURITY_HOST)  validate_against_str "xnx xyx" ;;
 
-      # BOOK validation. Very ugly, need be fixed
+        # BOOK validation. Very ugly, need be fixed
       BOOK)        if [[ "${WC}" = "1" ]] ; then
                      validate_dir -z -d
                    else
-                     validate_against_str "x${PROGNAME}-${LFSVRS}x"
+                     echo -e "`eval echo $PARAM_VALS`"
                    fi ;;
 
-      # Validate directories, testable states:
-      #  fatal   -z -d -w,
-      #  warning -z+   -w+
+        # Validate directories, testable states:
+        #  fatal   -z -d -w,
+        #  warning -z+   -w+
       SRC_ARCHIVE) [[ "$GETPKG" = "y" ]] && validate_dir -z+ -d -w+ ;;
-      BUILDDIR)   # The build directory/partition MUST exist and be writable by the user
-                  validate_dir -z -d -w
-                  [[ "xx x/x" =~ "x${!config_param}x" ]] &&
-                       write_error_and_die
-                  ;;
+        # The build directory/partition MUST exist and be writable by the user
+      BUILDDIR)   validate_dir -z -d -w
+                  [[ "xx x/x" =~ "x${!config_param}x" ]] && write_error_and_die ;;
 
-      # Validate files, testable states:
-      #  fatal   -z -e -s -w -x -r,
-      #  warning -z+
+        # Validate files, testable states:
+        #  fatal   -z -e -s -w -x -r,
+        #  warning -z+
       FSTAB)       validate_file -z+ -e -s ;;
       CONFIG)      validate_file -z+ -e -s ;;
       BOOT_CONFIG) [[ "${METHOD}" = "boot" ]] && validate_file -z -e -s ;;
 
-      # Treatment of 'special' parameters
+        # Treatment of 'special' parameters
       LANG | \
       LC_ALL)  # See it the locale values exist on this machine
                echo -n "`eval echo $PARAM_VALS`"
@@ -266,7 +179,7 @@
                KEYMAP=${save_param}
                ;;
 
-      # BLFS params. No validation is required/allowed, IMHO
+      # BLFS params.
       BRANCH_ID | BLFS_ROOT | BLFS_XML )  echo "`eval echo $PARAM_VALS`" ;;
       TRACKING_DIR ) validate_dir -z -d -w ;;
 

Deleted: jhalfs/trunk/hlfs
===================================================================
--- jhalfs/trunk/hlfs	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/hlfs	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1 +0,0 @@
-link master.sh
\ No newline at end of file

Copied: jhalfs/trunk/jhalfs (from rev 3072, jhalfs/branches/experimental/jhalfs)
===================================================================
--- jhalfs/trunk/jhalfs	                        (rev 0)
+++ jhalfs/trunk/jhalfs	2006-08-29 18:16:27 UTC (rev 3087)
@@ -0,0 +1,294 @@
+#!/bin/bash
+# $Id$
+set -e
+
+# VT100 colors
+declare -r  BLACK=$'\e[1;30m'
+declare -r  DK_GRAY=$'\e[0;30m'
+
+declare -r  RED=$'\e[31m'
+declare -r  GREEN=$'\e[32m'
+declare -r  YELLOW=$'\e[33m'
+declare -r  BLUE=$'\e[34m'
+declare -r  MAGENTA=$'\e[35m'
+declare -r  CYAN=$'\e[36m'
+declare -r  WHITE=$'\e[37m'
+
+declare -r  OFF=$'\e[0m'
+declare -r  BOLD=$'\e[1m'
+declare -r  REVERSE=$'\e[7m'
+declare -r  HIDDEN=$'\e[8m'
+
+declare -r  tab_=$'\t'
+declare -r  nl_=$'\n'
+
+declare -r   DD_BORDER="${BOLD}==============================================================================${OFF}"
+declare -r   SD_BORDER="${BOLD}------------------------------------------------------------------------------${OFF}"
+declare -r STAR_BORDER="${BOLD}******************************************************************************${OFF}"
+
+# bold yellow > <  pair
+declare -r R_arrow=$'\e[1;33m>\e[0m'
+declare -r L_arrow=$'\e[1;33m<\e[0m'
+
+
+#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
+#-----------------------#
+simple_error() {        # Basic error trap.... JUST DIE
+#-----------------------#
+  # If +e then disable text output
+  if [[ "$-" =~ "e" ]]; then
+    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
+  fi
+}
+
+see_ya() {
+    echo -e "\n${L_arrow}${BOLD}jhalfs-X${R_arrow} exit${OFF}\n"
+}
+##### Simple error TRAPS
+# ctrl-c   SIGINT
+# ctrl-y
+# ctrl-z   SIGTSTP
+# SIGHUP   1 HANGUP
+# SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
+# SIGQUIT  3
+# SIGKILL  9 KILL
+# SIGTERM 15 TERMINATION
+# SIGSTOP 17,18,23 STOP THE PROCESS
+#####
+set -e
+trap see_ya 0
+trap simple_error ERR
+trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
+#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
+version="
+${BOLD}  \"jhalfs-X\"${OFF} builder tool (experimental) \$Rev$
+  \$Date$
+
+  Written by George Boudreau and Manuel Canales Esparcia,
+  plus several contributions.
+
+  Based on an idea from Jeremy Huntwork
+
+  This set of files are published under the
+  ${BOLD}Gnu General Public License, Version 2.${OFF}
+"
+
+case $1 in
+  -v ) echo "$version" && exit 1 ;;
+  run ) : ;;
+  * )
+    echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
+    exit 1
+    ;;
+esac
+
+VERBOSITY=1
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
+source configuration
+[[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+      #--- Envars not sourced from configuration (yet)
+declare -r SVN="svn://svn.linuxfromscratch.org"
+declare -r LOG=000-masterscript.log
+
+case $PROGNAME in
+  clfs2) LFSVRS=development; TREE=branches/clfs-2.0/BOOK ;;
+      *) LFSVRS=development; TREE=trunk/BOOK             ;;
+esac
+
+if [[ ! -z ${BRANCH_ID} ]]; then
+  case $BRANCH_ID in
+    dev* | SVN | trunk )
+      case $PROGNAME in
+        clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
+             *) TREE=trunk/BOOK ;;
+      esac
+      LFSVRS=development
+      ;;
+    branch-* )
+      LFSVRS=${BRANCH_ID}
+      TREE=branches/${BRANCH_ID#branch-}/BOOK
+      ;;
+    * )
+      case $PROGNAME in
+        lfs | hlfs )
+          LFSVRS=${BRANCH_ID}
+          TREE=tags/${BRANCH_ID}/BOOK
+          ;;
+        clfs | clfs2 )
+          LFSVRS=${BRANCH_ID}
+          TREE=tags/${BRANCH_ID}
+          ;;
+      esac
+      ;;
+  esac
+fi
+
+# These are boolean vars generated from Config.in.
+# ISSUE: If a boolean parameter is not set <true> that
+# variable is not defined by the menu app. This can
+# cause a headache if you are not careful.
+#  The following parameters MUST be created and have a
+#  default value.
+RUNMAKE=${RUNMAKE:-n}
+GETPKG=${GETPKG:-n}
+GETKERNEL=${GETKERNEL:-n}
+COMPARE=${COMPARE:-n}
+RUN_FARCE=${RUN_FARCE:-n}
+RUN_ICA=${RUN_ICA:-n}
+BOMB_TEST=${BOMB_TEST:-n}
+STRIP=${STRIP:=n}
+REPORT=${REPORT:=n}
+VIMLANG=${VIMLANG:-n}
+KEYMAP=${KEYMAP:=none}
+GRSECURITY_HOST=${GRSECURITY_HOST:-n}
+
+# Set the document location...
+BOOK=${BOOK:=$PROGNAME-$LFSVRS}
+
+# Set true internal variables
+COMMON_DIR="common"
+PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
+MODULE=$PACKAGE_DIR/master.sh
+
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
+source $COMMON_DIR/common-functions
+[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
+[[ $VERBOSITY > 0 ]] && echo "OK"
+[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
+source $MODULE
+[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+#
+[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
+
+
+#*******************************************************************#
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
+source $COMMON_DIR/func_check_version.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+
+[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
+source $COMMON_DIR/func_validate_configs.sh
+[[ $? > 0 ]] && echo " function module did not load.." && exit 2
+[[ $VERBOSITY > 0 ]] && echo "OK"
+[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
+
+
+###################################
+###          MAIN               ###
+###################################
+
+# Check for minimum bash,tar,gcc and kernel versions
+echo
+check_version "2.6.2" "`uname -r`"         "KERNEL"
+check_version "3.0"   "$BASH_VERSION"      "BASH"
+check_version "3.0"   "`gcc -dumpversion`" "GCC"
+tarVer=`tar --version | head -n1 | cut -d " " -f4`
+check_version "1.15.0" "${tarVer}"      "TAR"
+echo "${SD_BORDER}${nl_}"
+
+validate_config
+echo "${SD_BORDER}${nl_}"
+echo -n "Are you happy with these settings? yes/no (no): "
+read ANSWER
+if [ x$ANSWER != "xyes" ] ; then
+  echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
+  exit 1
+fi
+echo "${nl_}${SD_BORDER}${nl_}"
+
+# Load additional modules or configuration files based on global settings
+# compare module
+if [[ "$COMPARE" = "y" ]]; then
+  [[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
+  source $COMMON_DIR/func_compare.sh
+  [[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
+  [[ $VERBOSITY > 0 ]] && echo "OK"
+fi
+#
+# optimize module
+if [[ "$OPTIMIZE" != "0" ]]; then
+  [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
+  source optimize/optimize_functions
+  [[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
+  [[ $VERBOSITY > 0 ]] && echo "OK"
+  #
+  # optimize configurations
+  [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
+  source optimize/opt_config
+  [[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
+  [[ $VERBOSITY > 0 ]] && echo "OK"
+  # Validate optimize settings, if required
+  validate_opt_settings
+fi
+#
+
+# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
+# and notify the user about that.
+if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
+  eval "$no_empty_builddir"
+fi
+
+# If requested, clean the build directory
+clean_builddir
+
+if [[ ! -d $JHALFSDIR ]]; then
+  mkdir -p $JHALFSDIR
+fi
+#
+# Create $BUILDDIR/sources even though it could be created by get_sources()
+if [[ ! -d $BUILDDIR/sources ]]; then
+  mkdir -p $BUILDDIR/sources
+fi
+#
+# Create the log directory
+if [[ ! -d $LOGDIR ]]; then
+  mkdir $LOGDIR
+fi
+>$LOGDIR/$LOG
+#
+[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
+#
+cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
+#
+[[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
+#
+if [[ "$COMPARE" = "y" ]]; then
+  mkdir -p $JHALFSDIR/extras
+  cp extras/* $JHALFSDIR/extras
+fi
+#
+if [[ -n "$FILES" ]]; then
+  # pushd/popd necessary to deal with multiple files
+  pushd $PACKAGE_DIR 1> /dev/null
+    cp $FILES $JHALFSDIR/
+  popd 1> /dev/null
+fi
+#
+if [[ "$REPORT" = "y" ]]; then
+  cp $COMMON_DIR/create-sbu_du-report.sh  $JHALFSDIR/
+  # After being sure that all looks sane, dump the settings to a file
+  # This file will be used to create the REPORT header
+  validate_config > $JHALFSDIR/jhalfs.config
+fi
+#
+[[ "$GETPKG" = "y" ]] && cp $COMMON_DIR/urls.xsl  $JHALFSDIR/
+#
+cp $COMMON_DIR/packages.xsl  $JHALFSDIR/
+#
+sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
+export XSL=$JHALFSDIR/${XSL}
+
+get_book
+echo "${SD_BORDER}${nl_}"
+
+build_Makefile
+echo "${SD_BORDER}${nl_}"
+
+run_make


Property changes on: jhalfs/trunk/jhalfs
___________________________________________________________________
Name: svn:executable
   + *
Name: svn:keywords
   + Author Date Revision Id

Deleted: jhalfs/trunk/lfs
===================================================================
--- jhalfs/trunk/lfs	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/lfs	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1 +0,0 @@
-link master.sh
\ No newline at end of file

Deleted: jhalfs/trunk/master.sh
===================================================================
--- jhalfs/trunk/master.sh	2006-08-29 18:01:39 UTC (rev 3086)
+++ jhalfs/trunk/master.sh	2006-08-29 18:16:27 UTC (rev 3087)
@@ -1,552 +0,0 @@
-#!/bin/bash
-# $Id$
-set -e
-
-
-#>>>>>>>>>>>>>>>ERROR TRAPPING >>>>>>>>>>>>>>>>>>>>
-#-----------------------#
-simple_error() {        # Basic error trap.... JUST DIE
-#-----------------------#
-  # If +e then disable text output
-  if [[ "$-" =~ "e" ]]; then
-    echo -e "\n${RED}ERROR:${GREEN} basic error trapped!${OFF}\n" >&2
-  fi
-}
-
-see_ya() {
-    echo -e "\n${L_arrow}${BOLD}jhalfs${R_arrow} exit${OFF}\n"
-}
-##### Simple error TRAPS
-# ctrl-c   SIGINT
-# ctrl-y
-# ctrl-z   SIGTSTP
-# SIGHUP   1 HANGUP
-# SIGINT   2 INTRERRUPT FROM KEYBOARD Ctrl-C
-# SIGQUIT  3
-# SIGKILL  9 KILL
-# SIGTERM 15 TERMINATION
-# SIGSTOP 17,18,23 STOP THE PROCESS
-#####
-set -e
-trap see_ya 0
-trap simple_error ERR
-trap 'echo -e "\n\n${RED}INTERRUPT${OFF} trapped\n" &&  exit 2'  1 2 3 15 17 18 23
-#>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
-
-if [ ! -L $0 ] ; then
-  echo "${nl_}${tab_}${BOLD}${RED}This script cannot be called directly: EXITING ${OFF}${nl_}"
-  exit 1
-fi
-
-     PROGNAME=$(basename $0)
-   COMMON_DIR="common"
-  PACKAGE_DIR=$(echo $PROGNAME | tr [a-z] [A-Z])
-       MODULE=$PACKAGE_DIR/master.sh
-MODULE_CONFIG=$PACKAGE_DIR/config
-    VERBOSITY=0
-
-
-if [[ -e using_menuconfig ]]; then
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading config params from <configuration>..."
-  source configuration
-  [[ $? > 0 ]] && echo "file:configuration did not load.." && exit 1
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-
-        #--- CONSTANTS
-  declare -r SVN="svn://svn.linuxfromscratch.org"
-  declare -r LOG=000-masterscript.log
-        # --- Server used if the file isn't found in SRC_ARCHIVE.
-        # As a last resort, the file will dowloaded from upstream, if possible.
-       SERVER=ftp://ftp.lfs-matrix.net
-	#--- Working directories
-  SCRIPT_ROOT=jhalfs
-    JHALFSDIR=$BUILDDIR/$SCRIPT_ROOT
-       LOGDIR=$JHALFSDIR/logs
-   TESTLOGDIR=$JHALFSDIR/test-logs
-       MKFILE=$JHALFSDIR/Makefile
-	#--- ICA report log directory
-    ICALOGDIR=$LOGDIR/ICA
-	#--- farce report log directory
-  FARCELOGDIR=$LOGDIR/farce
-          XSL=$PROGNAME.xsl
-      PKG_LST=unpacked
-
-  case $PROGNAME in
-    clfs2) LFSVRS=development; TREE=branches/clfs-2.0/BOOK ;;
-        *) LFSVRS=development; TREE=trunk/BOOK             ;;
-  esac
-
-  if [[ ! -z ${BRANCH_ID} ]]; then
-    case $BRANCH_ID in
-     dev* | SVN | trunk )
-      case $PROGNAME in
-        clfs2 ) TREE=branches/clfs-2.0/BOOK ;;
-             *) TREE=trunk/BOOK ;;
-      esac
-      LFSVRS=development
-      ;;
-    branch-* )
-       LFSVRS=${BRANCH_ID}
-       TREE=branches/${BRANCH_ID#branch-}/BOOK
-      ;;
-    * )
-      case $PROGNAME in
-        lfs | hlfs )
-           LFSVRS=${BRANCH_ID}
-          TREE=tags/${BRANCH_ID}/BOOK
-         ;;
-        clfs | clfs2 )
-           LFSVRS=${BRANCH_ID}
-           TREE=tags/${BRANCH_ID}
-         ;;
-      esac
-      ;;
-    esac
-  fi
-  # These are boolean vars generated from Config.in.
-  # ISSUE: If a boolean parameter is not set <true> that
-  # variable is not defined by the menu app. This can
-  # cause a headache if you are not careful.
-  #  The following parameters MUST be created and have a
-  #  default value.
-  RUNMAKE=${RUNMAKE:-n}
-  GETPKG=${GETPKG:-n}
-  GETKERNEL=${GETKERNEL:-n}
-  COMPARE=${COMPARE:-n}
-  RUN_FARCE=${RUN_FARCE:-n}
-  RUN_ICA=${RUN_ICA:-n}
-  BOMB_TEST=${BOMB_TEST:-n}
-  STRIP=${STRIP:=n}
-  REPORT=${REPORT:=n}
-  VIMLANG=${VIMLANG:-n}
-  KEYMAP=${KEYMAP:=none}
-  GRSECURITY_HOST=${GRSECURITY_HOST:-n}
-
-else
-  #
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading masterscript conf..."
-  source $COMMON_DIR/config
-  [[ $? > 0 ]] && echo "$COMMON_DIR/conf did not load.." && exit
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-  #
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading config module <$MODULE_CONFIG>..."
-  source $MODULE_CONFIG
-  [[ $? > 0 ]] && echo "$MODULE_CONFIG did not load.." && exit 1
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-  #
-fi
-
-
-[[ $VERBOSITY > 0 ]] && echo -n "Loading common-functions module..."
-source $COMMON_DIR/common-functions
-[[ $? > 0 ]] && echo " $COMMON_DIR/common-functions did not load.." && exit
-[[ $VERBOSITY > 0 ]] && echo "OK"
-[[ $VERBOSITY > 0 ]] && echo -n "Loading code module <$MODULE>..."
-source $MODULE
-[[ $? > 0 ]] && echo "$MODULE did not load.." && exit 2
-[[ $VERBOSITY > 0 ]] && echo "OK"
-#
-[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
-
-
-#===========================================================
-# If the var BOOK contains something then, maybe, it points
-# to a working doc.. set WC=1, else 'null'
-#===========================================================
-WC=${BOOK:+1}
-#===========================================================
-
-
-#*******************************************************************#
-[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_check_version.sh>..."
-source $COMMON_DIR/func_check_version.sh
-[[ $? > 0 ]] && echo " function module did not load.." && exit 2
-[[ $VERBOSITY > 0 ]] && echo "OK"
-
-[[ $VERBOSITY > 0 ]] && echo -n "Loading function <func_validate_configs.sh>..."
-source $COMMON_DIR/func_validate_configs.sh
-[[ $? > 0 ]] && echo " function module did not load.." && exit 2
-[[ $VERBOSITY > 0 ]] && echo "OK"
-[[ $VERBOSITY > 0 ]] && echo "${SD_BORDER}${nl_}"
-
-
-###################################
-###          MAIN               ###
-###################################
-
-# Evaluate any command line switches
-
-while test $# -gt 0 ; do
-  case $1 in
-  # Common options for {C,H}LFS books
-    --book | -B )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        dev* | SVN | trunk )
-          LFSVRS=development
-          TREE=trunk/BOOK
-          ;;
-        branch-* )
-          LFSVRS=$1
-          TREE=branches/${1#branch-}/BOOK
-          ;;
-        * )
-          case $PROGNAME in
-            lfs | hlfs )
-              LFSVRS=$1
-              TREE=tags/$1/BOOK
-              ;;
-            clfs )
-              LFSVRS=$1
-              TREE=tags/$1
-              ;;
-          esac
-          ;;
-      esac
-      ;;
-
-    --directory | -D )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        -* )
-          echo -e "\n$1 isn't a valid build directory."
-          echo -e "Directory names can't start with - .\n"
-          exit 1
-          ;;
-        * )
-          BUILDDIR=$1
-          JHALFSDIR=$BUILDDIR/${SCRIPT_ROOT}
-          LOGDIR=$JHALFSDIR/logs
-          TESTLOGDIR=$JHALFSDIR/test-logs
-          MKFILE=$JHALFSDIR/Makefile
-          ;;
-      esac
-      ;;
-
-    --get-packages | -G )      GETPKG=y    ;;
-
-    --help | -h )  usage | more && exit  ;;
-
-    --optimize | -O )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        0 | 1 | 2 )
-          OPTIMIZE=$1
-          ;;
-        * )
-          echo -e "\n$1 isn't a valid optimize level value."
-          echo -e "You must use 0, 1, or 2.\n"
-          exit 1
-          ;;
-      esac
-      ;;
-
-    --testsuites | -T )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        0 | 1 | 2 | 3 )
-          TEST=$1
-          ;;
-        * )
-          echo -e "\n$1 isn't a valid testsuites level value."
-          echo -e "You must to use 0, 1, 2, or 3.\n"
-          exit 1
-          ;;
-      esac
-      ;;
-
-    --version | -V )
-        echo "$version"
-        exit 0
-      ;;
-
-    --working-copy | -W )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $PROGNAME in # Poor checks. We should find better ones.
-        lfs)
-          if [ -d $1/chapter09 ] ; then
-            WC=1
-            BOOK=$1
-          else
-            echo -e "\nLooks like $1 isn't an LFS working copy."
-            exit 1
-          fi
-          ;;
-        clfs)
-          if [ -d $1/cross-tools ] ; then
-            WC=1
-            BOOK=$1
-          else
-            echo -e "\nLooks like $1 isn't a CLFS working copy."
-            exit 1
-          fi
-          ;;
-        hlfs)
-          if [ -f $1/template.xml ] ; then
-            WC=1
-            BOOK=$1
-          else
-            echo -e "\nLooks like $1 isn't an HLFS working copy."
-            exit 1
-          fi
-          ;;
-      esac
-      ;;
-
-    --comparison | -C )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        ICA)    RUN_ICA=y; RUN_FARCE=n; COMPARE=y  ;;
-        farce)  RUN_ICA=n; RUN_FARCE=y; COMPARE=y  ;;
-        both)   RUN_ICA=y; RUN_FARCE=y; COMPARE=y  ;;
-        *)
-          echo -e "\n$1 is an unknown analysis method."
-          exit 1
-          ;;
-      esac
-      ;;
-
-    --fstab | -F )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      if [ -f $1 ] ; then
-        FSTAB=$1
-      else
-        echo -e "\nFile $1 not found. Verify your command line.\n"
-        exit 1
-      fi
-      ;;
-
-    --kernel-config | -K )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      if [ -f $1 ] ; then
-        CONFIG=$1
-      else
-        echo -e "\nFile $1 not found. Verify your command line.\n"
-        exit 1
-      fi
-      ;;
-
-    --run-make | -M )      RUNMAKE=y ;;
-
-    --rebuild | -R )       CLEAN=y   ;;
-
-    # CLFS options
-    --arch | -A )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $PROGNAME in
-        CLFS2)
-	  case $1 in
-            arm) ARCH=arm; TARGET="arm-unknown-linux-gnu" ;;
-            x86) ARCH=x86; TARGET="i686-pc-linux-gnu"     ;;
-	      *) echo -e "\n$1 is an unknown or unsupported arch.";  exit 1
-          esac
-	  ;;
-        CLFS)
-          case $1 in
-            arm )   ARCH=arm;   TARGET="arm-unknown-linux-gnu" ;;
-            x86 )   ARCH=x86;   TARGET="i686-pc-linux-gnu"     ;;
-           i486 )   ARCH=x86;   TARGET="i486-pc-linux-gnu"     ;;
-           i586 )   ARCH=x86;   TARGET="i586-pc-linux-gnu"     ;;
-            ppc )   ARCH=ppc;   TARGET="powerpc-unknown-linux-gnu"   ;;
-           mips )   ARCH=mips;  TARGET="mips-unknown-linux-gnu"      ;;
-           mipsel ) ARCH=mips;  TARGET="mipsel-unknown-linux-gnu"    ;;
-            sparc ) ARCH=sparc; TARGET="sparcv9-unknown-linux-gnu"   ;;
-
-           x86_64-64 )   ARCH=x86_64-64;  TARGET="x86_64-unknown-linux-gnu"   ;;
-           mips64-64 )   ARCH=mips64-64;  TARGET="mips-unknown-linux-gnu"     ;;
-           mipsel64-64 ) ARCH=mips64-64;  TARGET="mipsel-unknown-linux-gnu" ;;
-           sparc64-64 )  ARCH=sparc64-64; TARGET="sparc64-unknown-linux-gnu" ;;
-           alpha )       ARCH=alpha;      TARGET="alpha-unknown-linux-gnu"   ;;
-
-           x86_64 )   ARCH=x86_64;  TARGET="x86_64-unknown-linux-gnu";    TARGET32="i686-pc-linux-gnu"        ;;
-           mips64 )   ARCH=mips64;  TARGET="mips-unknown-linux-gnu";      TARGET32="mips-unknown-linux-gnu"   ;;
-           mipsel64 ) ARCH=mips64;  TARGET="mipsel-unknown-linux-gnu";    TARGET32="mipsel-unknown-linux-gnu"  ;;
-           sparc64 )  ARCH=sparc64; TARGET="sparc64-unknown-linux-gnu";   TARGET32="sparcv9-unknown-linux-gnu"  ;;
-            ppc64 )   ARCH=ppc64;   TARGET="powerpc64-unknown-linux-gnu"; TARGET32="powerpc-unknown-linux-gnu"  ;;
-
-            * )  echo -e "\n$1 is an unknown or unsupported arch.";   exit 1  ;;
-          esac
-	  ;;
-      esac
-      ;;
-
-    --boot-config )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      if [ -f $1 ] ; then
-        BOOT_CONFIG=$1
-      else
-        echo -e "\nFile $1 not found. Verify your command line.\n"
-        exit 1
-      fi
-      ;;
-
-    --method )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        chroot | boot )
-          METHOD=$1
-          ;;
-        * )
-          echo -e "\n$1 isn't a valid build method."
-          exit 1
-          ;;
-      esac
-      ;;
-
-    # HLFS options
-    --model )
-      test $# = 1 && eval "$exit_missing_arg"
-      shift
-      case $1 in
-        glibc | uclibc )
-          MODEL=$1
-          ;;
-        * )
-          echo -e "\n$1 isn't a valid libc model."
-          exit 1
-          ;;
-      esac
-      ;;
-
-    # Unknown options
-    * )   usage   ;;
-  esac
-  shift
-done
-
-
-#===================================================
-# Set the document location...
-# BOOK is either defined in
-#   xxx.config
-#   comand line
-#   default
-# If set by conf file or cmd line leave it
-# alone otherwise load the default version
-#===================================================
-BOOK=${BOOK:=$PROGNAME-$LFSVRS}
-#===================================================
-
-
-# Check for minimum bash,tar,gcc and kernel versions
-echo
-check_version "2.6.2" "`uname -r`"         "KERNEL"
-check_version "3.0"   "$BASH_VERSION"      "BASH"
-check_version "3.0"   "`gcc -dumpversion`" "GCC"
-tarVer=`tar --version | head -n1 | cut -d " " -f4`
-check_version "1.15.0" "${tarVer}"      "TAR"
-echo "${SD_BORDER}${nl_}"
-
-validate_config
-echo "${SD_BORDER}${nl_}"
-echo -n "Are you happy with these settings? yes/no (no): "
-read ANSWER
-if [ x$ANSWER != "xyes" ] ; then
-  echo "${nl_}Fix the configuration options and rerun the script.${nl_}"
-  exit 1
-fi
-echo "${nl_}${SD_BORDER}${nl_}"
-
-# Load additional modules or configuration files based on global settings
-# compare module
-if [[ "$COMPARE" = "y" ]]; then
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading compare module..."
-  source $COMMON_DIR/func_compare.sh
-  [[ $? > 0 ]] && echo "$COMMON_DIR/func_compare.sh did not load.." && exit
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-fi
-#
-# optimize module
-if [[ "$OPTIMIZE" != "0" ]]; then
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization module..."
-  source optimize/optimize_functions
-  [[ $? > 0 ]] && echo " optimize/optimize_functions did not load.." && exit
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-  #
-  # optimize configurations
-  [[ $VERBOSITY > 0 ]] && echo -n "Loading optimization config..."
-  source optimize/opt_config
-  [[ $? > 0 ]] && echo " optimize/opt_config did not load.." && exit
-  [[ $VERBOSITY > 0 ]] && echo "OK"
-  # Validate optimize settings, if required
-  validate_opt_settings
-fi
-#
-
-# If $BUILDDIR has subdirectories like tools/ or bin/, stop the run
-# and notify the user about that.
-if [ -d $BUILDDIR/tools -o -d $BUILDDIR/bin ] && [ -z $CLEAN ] ; then
-  eval "$no_empty_builddir"
-fi
-
-# If requested, clean the build directory
-clean_builddir
-
-if [[ ! -d $JHALFSDIR ]]; then
-  mkdir -p $JHALFSDIR
-fi
-#
-# Create $BUILDDIR/sources even though it could be created by get_sources()
-if [[ ! -d $BUILDDIR/sources ]]; then
-  mkdir -p $BUILDDIR/sources
-fi
-#
-# Create the log directory
-if [[ ! -d $LOGDIR ]]; then
-  mkdir $LOGDIR
-fi
->$LOGDIR/$LOG
-#
-[[ "$TEST" != "0" ]] && [[ ! -d $TESTLOGDIR ]] && install -d -m 1777 $TESTLOGDIR
-#
-if [[ "$PWD" != "$JHALFSDIR" ]]; then
-  cp $COMMON_DIR/{makefile-functions,progress_bar.sh} $JHALFSDIR/
-  #
-  [[ "$OPTIMIZE" != "0" ]] && cp optimize/opt_override $JHALFSDIR/
-  #
-  if [[ "$COMPARE" = "y" ]]; then
-    mkdir -p $JHALFSDIR/extras
-    cp extras/* $JHALFSDIR/extras
-  fi
-  #
-  if [[ -n "$FILES" ]]; then
-    # pushd/popd necessary to deal with multiple files
-    pushd $PACKAGE_DIR 1> /dev/null
-      cp $FILES $JHALFSDIR/
-    popd 1> /dev/null
-  fi
-  #
-  if [[ "$REPORT" = "y" ]]; then
-    cp $COMMON_DIR/create-sbu_du-report.sh  $JHALFSDIR/
-    # After being sure that all looks sane, dump the settings to a file
-    # This file will be used to create the REPORT header
-    validate_config > $JHALFSDIR/jhalfs.config
-  fi
-  #
-  [[ "$GETPKG" = "y" ]] && cp $COMMON_DIR/urls.xsl  $JHALFSDIR/
-  #
-  cp $COMMON_DIR/packages.xsl  $JHALFSDIR/
-  #
-  sed 's,FAKEDIR,'$BOOK',' $PACKAGE_DIR/$XSL > $JHALFSDIR/${XSL}
-  export XSL=$JHALFSDIR/${XSL}
-fi
-
-get_book
-echo "${SD_BORDER}${nl_}"
-
-build_Makefile
-echo "${SD_BORDER}${nl_}"
-
-run_make




More information about the alfs-log mailing list